Eiki LC-X71L owner manual Video Input

Page 31

VIDEO INPUT

SELECTING INPUT SOURCE

DIRECT OPERATION

Select an INPUT source by pressing the INPUT button on the top control or the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control.

If the projector cannot reproduce proper image, select a correct input source through MENU OPERATION (see below).

MENU OPERATION

INPUT button

Input 1

Input 2

Input 3

Input 1 is not displayed when the Input 1 is used as Monitor out.

WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )

When connecting to video equipment, select a type of Video

source in the Source Select Menu.

INPUT MENU

1

Press the MENU button to display the On-Screen Menu.

 

Press the POINT LEFT/RIGHT buttons to move the red frame

 

pointer to the INPUT Menu icon.

2

Press the POINT UP/DOWN buttons to move the red arrow

 

pointer to Input 2 and then press the SELECT button. A

Source Select Menu appears.

INPUT Menu icon

Move the pointer (red arrow) to Input 2 and press the SELECT button.

3

Move the pointer to a source that you want to select and then

Input 2

 

 

press the SELECT button.

 

 

 

 

When the video input signal is connected to the

 

 

Video

 

 

 

 

 

VIDEO jack, select Video.

 

 

 

 

 

 

When the video input signal is connected to the Y-

 

Y, Pb/Cb, Pr/Cr

 

 

 

 

Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.

 

 

 

 

 

NOTE:

INPUT SOURCE changes if the INPUT 2 button on the remote control is pressed.

Source Select Menu

Move the pointer (red arrow) to Video or Y, Pb/Cb, Pr/Cr and press the SELECT button.

WHEN SELECTING INPUT 3 (AV TERMINALS )

When connecting to video equipment, select a type of Video source in the Source Select (Video) Menu.

1

Press the MENU button to display the On-Screen Menu.

 

Press the POINT LEFT/RIGHT buttons to move the red frame

 

pointer to the INPUT Menu icon.

2

Press the POINT UP/DOWN buttons to move the red arrow

 

pointer to Input 3 and then press the SELECT button. A

 

Source Select Menu appears.

3

Move the pointer to a source that you want to select and then

 

press the SELECT button.

 

 

 

When the video input signal is connected to the

 

Video

 

 

 

 

VIDEO jack, select Video.

 

 

 

 

When the video input signal is connected to the Y-

Y, Pb/Cb, Pr/Cr

 

 

 

Pb/Cb-Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.

 

 

 

 

When the video input signal is connected to the S-

S-Video

 

 

 

 

VIDEO jack, select S-Video.

 

 

 

NOTE:

INPUT SOURCE changes if the INPUT 3 button on the remote control is pressed.

INPUT MENU

INPUT Menu icon

Move the pointer (red arrow) to Input 3 and press the SELECT button.

Input 3

Source Select Menu

Move the pointer (red arrow) to a source and press the SELECT button.

31

Image 31
Contents LC-X71L Lensless Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsCompliance AC Power Cord RequirementEsperanza Rancho Santa Margarita CA 92688-2132, U.S.A Table of Contents Component Video Features and DesignComputers Color SystemsName of Each Part of Projector PreparationConnecting AC Power Cord SETTING-UP Projector200 240 V AC 100 150 200 250 300 400 Size Lens InstallationPreparation Positioning Projector ScreenInstalling Projector in Proper Position Preparation Adjustable FeetPreparation Moving Projector Terminals of Projector Connecting ProjectorTerminals Projector Connecting to ComputersExternal Speaker Terminals Front of the projectorBNC Cable Scart Cable Video Cable Audio Cable RCA x Connecting to Video EquipmentTerminals Before Operation Remote Control OperationLaser Pointer Function Before Operation Remote Control Batteries InstallationLamp Indicator TOP Controls and IndicatorsEXT. SP Switch Lamp Replace IndicatorON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Turning on the Projector What is PIN code?Basic Operation Turning on / OFF ProjectorBasic Operation Turning OFF the Projector Keystone Correction Adjusting ScreenFocus Adjustment Lens Shift AdjustmentNo Show Function Sound AdjustmentTimer Function Basic Operation Picture Freeze FunctionInput Menu Computer InputSelecting Input Source RGB AV HdcpSvga Selecting Computer SystemAutomatic MULTI-SCAN System PC System MenuPC Adjust Menu PC AdjustmentAuto PC Adjustment Pointer to the PC Adjust Menu iconComputer Input Manual PC Adjustment Quit ResetMode free StoreImage Level Select Picture Image SelectImage Select Menu Picture Screen Select Picture Screen AdjustmentScreen Menu Video Input AV System Menu Video or S-VIDEO Component Video Signal FormatSelecting Video System PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NCinema Picture level adjusted for picture with fine toneImage button Standard Cinema Provides image at the wide screen ratio Provides image at the normal video aspect ratioPicture Image Picture Image AdjustmentsImage Adjust Menu Pointer ModeDEL Color MMenu Color PaletteSharpness White balance RedWhite balance Green White balance BlueSetting Menu SettingSetting Menu Language Logo PIN code lock LogoLogo select CaptureAnamorphic Power managementCeiling RearLamp control Remote controlTo change the code of the remote control On startNot used Wireless Mouse modeProjector mode USBTo Change the PIN Code PIN code lock To Change the PIN Code Lock settingChanging the PIN code lock setting PIN code lockExit the Setting Menu Lamp counter Factory defaultQuit Right Click button Wireless MouseAppendix Left Click buttonMaintenance Cleaning Projection Lens Appendix AIR Filters Care and CleaningLamp Replacement Turn the projector on and press the Menu button to display Appendix Lamp Replace CounterLamp counter Troubleshooting Check the mouse setting on your computer Remote controlCheck the remote control code in the remote control SeeSETTING onImage Select Screen PC AdjustMenu Tree SystemSound SettingImage Adjust Image SelectResolution Appendix Compatible Computer SpecificationsIndicators and Projector Condition Temperature inside the projector is abnormally high Ready indicator lights greenAC power cord and contact the dealer or the service Projector is in the Power management modeProjection Image Size Diagonal Technical SpecificationsTerminal Mini DIN 8-PIN Pin Configuration Appendix Configurations of TerminalsTerminal HDB15-PIN Pin Configuration Terminal DVI 24-pin Pin ConfigurationPJ Link Notice Lens ReplacementTo the sales and service engineer Appendix Optional PartsLogo PIN Code Lock No Appendix PIN Code Number MemoDimensions Key to better communications Canada

LC-X71, LC-X71L specifications

The Eiki LC-X71L and LC-X71 are high-performance LCD projectors designed to meet the diverse needs of modern presentations and entertainment. Both models are built with exceptional technology and numerous features that enhance their usability in various environments, from boardrooms to classrooms.

At the heart of the Eiki LC-X71L and LC-X71 projectors is their advanced LCD technology, which ensures vibrant color reproduction and sharp image quality. With a native resolution of XGA (1024x768 pixels), these projectors deliver crisp visuals, making them ideal for detailed presentations and video playback. The high brightness levels, typically around 5000 lumens, ensure excellent visibility even in well-lit spaces, making it easier for audiences to see the content without strain.

One of the standout features of the Eiki LC-X71L and LC-X71 is their robust connectivity options. Both models are equipped with multiple input terminals, including HDMI, VGA, and composite video, allowing users to connect a variety of devices ranging from computers to gaming consoles. Moreover, the projectors support various input sources, such as USB and even wireless connectivity via optional adapters, promoting flexibility in presentation setups.

The Eiki LC-X71L and LC-X71 are also designed with user-friendliness in mind. The intuitive on-screen menu and straightforward remote control simplify navigation and operation, allowing users to adjust settings quickly. The projectors include features such as auto keystone correction, which automatically adjusts the image for optimal alignment, reducing setup time and improving productivity.

In terms of durability, both models feature a long lamp life, often exceeding 5000 hours in eco mode. This longevity enhances cost-effectiveness, minimizing the need for frequent lamp replacements and contributing to lower total ownership costs. Additionally, both projectors have efficient cooling systems to maintain optimal performance and prolong operational life.

Overall, the Eiki LC-X71L and LC-X71 projectors combine advanced technology, user-friendly features, and robust performance to cater to various applications. Whether for business meetings, educational purposes, or casual viewing, these projectors provide an exceptional visual experience that meets the high demands of today’s users.