Eiki LC-X71L Logo select, Capture, Logo PIN code lock, To Enter a Logo PIN code

Page 39

SETTING

Logo

This function allows you to customize the screen logo with Logo select, Capture, and Logo PIN code lock functions.

Logo select

This function decides the start-up display as follows: User . . . the image you captured

Default . the factory-set logo Off . . . . count-down only

Capture

This function enables you to capture the image being projected and use it for a starting-up display.

After capturing the projected image, go to the Logo select function and set it to “User.” Then the captured image will be displayed when turning on the projector the next time.

To capture the image, select [Yes]. To cancel the Capture function, select [No].

NOTE:

•Before capturing an image, select Standard in the IMAGE SELECT Menu to capture proper image. (See pages 29 and 33.)

•A signal from a computer can be captured up to XGA (1024 X 768).

•Certain signals may not be captured properly.

•When capturing the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone correction.

•When starting to capture a new image, the previously stored image is cleared even if you cancel the capturing.

•Once you exit the Logo Menu after setting the Logo lock to "On," you are required to enter the PIN code every attempting to change the Logo setting.

Logo PIN code lock

This function prevents an unauthorized person from changing the Logo setting.

Off . . . . the Logo setting can be changed freely from the Logo function.

On . . . . the Logo setting cannot be changed without a Logo PIN code.

If you want to change the Logo PIN code lock setting, enter a Logo PIN code by following the steps below. The initial Logo PIN code is set to “4321” at the factory.

To Enter a Logo PIN code

Select a number by pressing the POINT LEFT/RIGHT buttons and fix the number with the SELECT button. The number changes to “✳.” If you fixed a wrong number, move the pointer to “Set” or “Clear” once by pressing the POINT DOWN button, then return to “Logo PIN code.” Enter the correct number.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, the pointer automatically moves to “Set.” Press the SELECT button so that you can change the Logo PIN code lock setting.

If you entered a wrong Logo PIN code, “Logo PIN code” and the number (✳✳✳✳) turn red and disappear. Enter a Logo PIN code all over again.

Logo

Select [Yes] to capture the projected image.

Select [Yes] to stop capturing.

Logo PIN Code Lock Dialog Box

Pointer

Quit

After a correct Logo PIN code is entered, the following dialog box appears.

Select On/Off by pressing the POINT LEFT/RIGHT buttons or change the Logo PIN code.

To Change the Logo PIN code

Logo PIN code can be changed to your desired four-digit number. Select “Logo PIN code change” with the POINT DOWN button and press the SELECT button. Set a new Logo PIN code.

Be sure to write down the new Logo PIN code and keep it at hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on the PIN code setting, refer to the relevant instructions of the PIN code lock function on page 43.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents LC-X71L Lensless Risk of Electric Shock Do not Open To the OwnerVoor de klanten in Nederland Safety InstructionsAC Power Cord Requirement ComplianceEsperanza Rancho Santa Margarita CA 92688-2132, U.S.A Table of Contents Component Video Features and DesignComputers Color SystemsName of Each Part of Projector PreparationSETTING-UP Projector Connecting AC Power Cord200 240 V AC 100 150 200 250 300 400 Size Lens InstallationPreparation Positioning Projector ScreenInstalling Projector in Proper Position Preparation Adjustable FeetPreparation Moving Projector Terminals of Projector Connecting ProjectorTerminals Projector Connecting to ComputersExternal Speaker Terminals Front of the projectorConnecting to Video Equipment BNC Cable Scart Cable Video Cable Audio Cable RCA xTerminals Remote Control Operation Before OperationLaser Pointer Function Before Operation Remote Control Batteries InstallationLamp Indicator TOP Controls and IndicatorsEXT. SP Switch Lamp Replace IndicatorHOW to Operate ON-SCREEN Menu ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Turning on the Projector What is PIN code?Basic Operation Turning on / OFF ProjectorBasic Operation Turning OFF the Projector Keystone Correction Adjusting ScreenFocus Adjustment Lens Shift AdjustmentNo Show Function Sound AdjustmentTimer Function Basic Operation Picture Freeze FunctionInput Menu Computer InputSelecting Input Source RGB AV HdcpSvga Selecting Computer SystemAutomatic MULTI-SCAN System PC System MenuPC Adjust Menu PC AdjustmentAuto PC Adjustment Pointer to the PC Adjust Menu iconComputer Input Manual PC Adjustment Quit ResetMode free StorePicture Image Select Image Level SelectImage Select Menu Picture Screen Adjustment Picture Screen SelectScreen Menu Video Input AV System Menu Video or S-VIDEO Component Video Signal FormatSelecting Video System PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NPicture level adjusted for picture with fine tone CinemaImage button Standard Cinema Provides image at the wide screen ratio Provides image at the normal video aspect ratioPicture Image Picture Image AdjustmentsImage Adjust Menu Pointer ModeDEL Color MMenu Color PaletteSharpness White balance RedWhite balance Green White balance BlueSetting Setting MenuSetting Menu Language Logo PIN code lock LogoLogo select CaptureAnamorphic Power managementCeiling RearLamp control Remote controlTo change the code of the remote control On startNot used Wireless Mouse modeProjector mode USBTo Change the PIN Code PIN code lock To Change the PIN Code Lock settingChanging the PIN code lock setting PIN code lockLamp counter Factory default Exit the Setting MenuQuit Right Click button Wireless MouseAppendix Left Click buttonMaintenance Cleaning Projection Lens Appendix AIR Filters Care and CleaningLamp Replacement Appendix Lamp Replace Counter Turn the projector on and press the Menu button to displayLamp counter Troubleshooting Check the mouse setting on your computer Remote controlCheck the remote control code in the remote control SeeSETTING onImage Select Screen PC AdjustMenu Tree SystemSound SettingImage Adjust Image SelectResolution Appendix Compatible Computer SpecificationsIndicators and Projector Condition Temperature inside the projector is abnormally high Ready indicator lights greenAC power cord and contact the dealer or the service Projector is in the Power management modeProjection Image Size Diagonal Technical SpecificationsTerminal Mini DIN 8-PIN Pin Configuration Appendix Configurations of TerminalsTerminal HDB15-PIN Pin Configuration Terminal DVI 24-pin Pin ConfigurationPJ Link Notice Lens ReplacementTo the sales and service engineer Appendix Optional PartsLogo PIN Code Lock No Appendix PIN Code Number MemoDimensions Key to better communications Canada

LC-X71, LC-X71L specifications

The Eiki LC-X71L and LC-X71 are high-performance LCD projectors designed to meet the diverse needs of modern presentations and entertainment. Both models are built with exceptional technology and numerous features that enhance their usability in various environments, from boardrooms to classrooms.

At the heart of the Eiki LC-X71L and LC-X71 projectors is their advanced LCD technology, which ensures vibrant color reproduction and sharp image quality. With a native resolution of XGA (1024x768 pixels), these projectors deliver crisp visuals, making them ideal for detailed presentations and video playback. The high brightness levels, typically around 5000 lumens, ensure excellent visibility even in well-lit spaces, making it easier for audiences to see the content without strain.

One of the standout features of the Eiki LC-X71L and LC-X71 is their robust connectivity options. Both models are equipped with multiple input terminals, including HDMI, VGA, and composite video, allowing users to connect a variety of devices ranging from computers to gaming consoles. Moreover, the projectors support various input sources, such as USB and even wireless connectivity via optional adapters, promoting flexibility in presentation setups.

The Eiki LC-X71L and LC-X71 are also designed with user-friendliness in mind. The intuitive on-screen menu and straightforward remote control simplify navigation and operation, allowing users to adjust settings quickly. The projectors include features such as auto keystone correction, which automatically adjusts the image for optimal alignment, reducing setup time and improving productivity.

In terms of durability, both models feature a long lamp life, often exceeding 5000 hours in eco mode. This longevity enhances cost-effectiveness, minimizing the need for frequent lamp replacements and contributing to lower total ownership costs. Additionally, both projectors have efficient cooling systems to maintain optimal performance and prolong operational life.

Overall, the Eiki LC-X71L and LC-X71 projectors combine advanced technology, user-friendly features, and robust performance to cater to various applications. Whether for business meetings, educational purposes, or casual viewing, these projectors provide an exceptional visual experience that meets the high demands of today’s users.
Top Page Image Contents