Basic Functions
English
Demonstration mode
The system has a demonstration mode that shows the various features offered by the system.
To activate the demonstration
●In standby mode, press and holdÇon the system until "WELCOME" is displayed.
➜ The demonstration will begin.
To deactivate the demonstration
●Press and holdÇon the system until "DEMO OFF" is displayed.
➜ The system will switch to standby mode.
Note:
–If you have not deactivated the demonstration, it will resume five seconds after the system switches to standby mode.
Switching the system on
In standby/demonstration mode
●Press STANDBY ON to switch on the last selected source.
●Press VCD 1/2/3 (VCD.CD 1/2/3), TUNER, TAPE (TAPE 1/2) or AUX.
●Press OPEN/CLOSE.
➜ The system will switch to CD mode.
Switching the system to standby mode
In demonstration mode
●Press and hold Ç on the system.
In any other source mode
●Press STANDBY ON (or B on the remote control).
➜ The clock will appear on the display when the system is in standby mode.
Dim mode
You can select the desired brightness for the display.
●In any source mode (except standby mode), press DIM repeatedly to select : DIM 1, DIM 2, DIM 3 or DIM OFF display mode.
➜ DIM is shown, except for DIM OFF mode.
Note:
–In standby mode, pressing DIM to select half or full brightness for clock display.
Volume control
Adjust MASTER VOLUME (or press VOLUME + or - on the remote control) to increase or decrease the volume level.
To listen through the headphones
●Connect the headphones plug to
the n socket at the front of the system.
➜ The speakers will be muted.
14