Tape Operation / Recording
English |
IMPORTANT!
–Before playing a tape, check and tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism.
–
–Store the tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer, TV or speaker).
Loading tape
1Press on the tape deck to
open the tape deck door.
2 Load the tape with the open side downward and full spool to the left.
3Close the tape deck door.
Playing tapes
To playback a selected tape deck
1Press TAPE (or TAPE 1/2 on the remote control) repeatedly to select tape deck 1 or 2.
2PressÉÅ.
To stop playback
●Press Ç.
To select automatic replay or one time playback
●Press A. REPLAY repeatedly to select the different playback modes.
➜ "AUTO REPLAY" ( 
) or "ONCE" ( ) is displayed.
AUTO REPLAY …the tape will rewind automatically at the end of playback and replay again. It will replay up to a maximum of 20 times.
ONCE .............. the tape will playback the
selected side once and then stop.
26