Philips FW-V330 manual General

E n g l i s h

Troubleshooting

GENERAL

The system does not react when	–	Remove and reconnect the AC power plug and
buttons are pressed.		switch on the system again.
Sound cannot be heard or is of poor	–	Adjust the volume.
quality.	–	Disconnect the headphones.
	– Check that the speakers are connected correctly.
	– Check if the stripped speaker wire is clamped.
	– Make sure the MP3 disc was recorded within
		32-256 kbps bit rate with sampling frequencies at
		48 kHz, 44.1 kHz or 32 kHz.
The left and right sound outputs are	–	Check the speaker connections and location.
reversed.
The remote control does not function	–	Select the source (VCD 1/2/3 or TUNER, for
properly.		example) before pressing the function button
		(É,í,ë).
	– Reduce the distance between the remote
		control and the system.
	– Insert the batteries with their polarities
		(+/– signs) aligned as indicated.
	–	Replace the batteries.
	– Point the remote control directly towards the IR
		sensor .
The timer is not working.	–	Set the clock correctly.
	– Press and hold CLOCK•TIMER to switch on the
		timer.
	– If recording or tape dubbing is in progress, stop
		recording.
The Clock/Timer setting is erased.	–	Power has been interrupted or the power cord
		has been disconnected. Reset the clock/timer.
The system displays features	–	Press and hold Çon the system to switch off
automatically.		the demonstration.

34