Philips FW-V330 manual Specifications

Specifications

E n g l i s h

AMPLIFIER
Output power		800 W PMPO
........................................................................		2 x 20 W RMS
Signal-to-noise ratio	≥ 67 dBA (IEC)
Frequency response		50 – 15000 Hz
Input sensitivity
AUX/CDR In		500 mV / 1V
Microphone		3.5 mV
Output
Speakers		≥ 6 Ω
Headphones	32 Ω – 1000 Ω
(1) (6 Ω, 1 kHz, 10% THD)
CD/VCD/MP3-CD PLAYER
Number of programmable tracks		......................... 99
Frequency range		20 – 20000 Hz
Signal-to-noise ratio		≥ 80 dBA
Channel separation	≥ 60 dB (1 kHz)
Total harmonic distortion		< 0.003%
MPEG 1	VCD version 2.0
MPEG 1 Layer 3 (MP3-CD)		MPEG AUDIO
MP3-CD bit rate		32-256 kbps
	(128 kbps advised)
Sampling frequencies	32, 44.1, 48 kHz
RADIO RECEPTION
FM wave range	87.5 – 108 MHz
MW wave range (9 kHz)	531 – 1602 kHz
MW wave range (10 kHz)	530 – 1700 kHz
Tuning grid		9/10 kHz
Number of presets		40
Antenna
FM		75 Ω wire
AM		Loop antenna

TAPE DECK
Frequency response
Normal tape (type I)	...... 80 – 12500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I)	................................ ≥ 48 dBA
Wow and flutter	≤ 0.4% DIN
SPEAKERS
System	double port bass reflex
Impedance	6 Ω
Woofer	1 x 4" full range

Dimensions (w x h x d) . 210 x 310 x 235 (mm)

Weight		2.9 kg each
GENERAL INFORMATION
Material		Polystyrene
AC Power	110 – 127 / 220 – 240 V;
.......................................................		50/60 Hz Switchable
Power Consumption
Active		35 W
Standby		< 15 W
Dimensions (w x h x d)	.... 265x 310x 365 (mm)
Weight (without speakers)		................................. 5.8 kg

Specifications and external appearance are subject to change without notice.

32