Sceptre Technologies X42 user manual Trouble Shooting, 107

SCEPTRE X42 HDTV User Manual

Please Note :

•Make sure you wring the water out of the cloth before cleaning the bezel or remote in order to prevent water from penetrating into the electronics.

Cleaning the Screen

1.Use a 100% cotton cloth or micro-fiber cloth for cleaning. DO NOT use the custom bezel cleaning cloth.

2.The LCD screen glass is extremely fragile. Do not scrape it with any material. Do not press or tap the screen to avoid cracking. When the screen is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again. Wipe the display with a dry micro-fiber cloth or 100% cotton cloth afterwards.

Trouble Shooting

The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians.

Problems	Solutions
	Connect power cord correctly.
	Turn on power.
NO	Connect video cable correctly.
PICTURE	Select the input signal source with proper cable connection with
	the source button.
ABNORMAL	Match the colors on the cables to the ports off the back of the
COLORS	television. I.E. red cable to red colored port.
PICTURE IS	Adjust your contrast, brightness and lamp settings from the OSD
TOO DARK	Menu.
AUDIO	Make sure you have connected both your video and audio cables.
ONLY NO
	The TV’s tuner signal must not be lower than 65 %.
PICTURE

- 107 -

www.SCEPTRE.com