Sceptre Technologies X42 user manual ConnectingYour Satellite or Cable Set- top box to the TV

SCEPTRE X42 HDTV User Manual

ConnectingYour Satellite or Cable Set- top box to the TV

IfYou Want the Best Connection with HDMI…

1.Make sure the power of X42 LCD HDTV and your set-top box is turned off.

2.Connect a HDMI cable to the HDMI output of your set-top box and the other end to the HDMI port off the back of your X42 LCD HDTV.

3.Turn on the X42 LCD HDTV and your set-top box.

4.Use the remote control’s source button or the source button on the right side of the TV to switch to HDMI 1.

Please Note :

•Please reference the set-top box’s manual, to make sure the set- top box is configured to output correctly to the TV.

•If HDMI 1 is already occupied, please use HDMI 2 as your connection port and switch source to HDMI 2.

•This TV does not decode Bitstream digital audio, therefore you’ll need to make sure your DVD is setup for PCM digital audio through HDMI.

•Sceptre’s X42 LCD HDTV supports SONY’s universal remote code. Please look up SONY’s codes in your universal remote’s hand book.

- 33 -

www.SCEPTRE.com