SCEPTRE X42 HDTV User Manual
3.Press the ↵ button to go into TUNER MODE function.
4.Press the ▲ or ▼ buttons to select the options AIR or CABLE.
5.If you have an antenna connected to the X42 LCD HDTV, please select AIR as your option by pressing the ↵ button.
6.If you have cable connected to your X42 LCD HDTV, please select CABLE as your option by pressing the ↵ button. An additional option will pop up. Please use the ▲ or ▼ buttons to select AUTO as your cable option and press ↵ to confirm the selection.
7.Once you have made the selection, the OSD will return you back to CHANNEL main options. Press the ▼ button to highlight the AUTO
SCAN function and press ↵ twice to start scanning for channels.
8.Once the scanning is done, you can watch the TV.
Please Note :
•Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting stations for more information.
•The X42 LCD HDTV’s tuner is designed for HDTV therefore requires a stronger signal than normal TVs. If you cannot achieve that signal level with your antenna or cable, your X42 LCD HDTV might lose picture or sound.
- 42 -
www.SCEPTRE.com