SCEPTRE X42 HDTV User Manual
IfYou have Cable or Antenna…
1.Make sure the power of X42 LCD HDTV is turned off.
2.Connect the Coaxial RF cable from your antenna or cable to the ATSC/NTSC port off the back of your X42 LCD HDTV.
3.Turn on the X42 LCD HDTV.
4.Select TV (Air) for antenna or TV (Cable) for cable from either your remote control’s source button or source button on the right side of the TV.
5.Use the On Screen Display to scan for channels.
Please Note :
•Not all broadcasts are in High Definition (HD). Please refer to your local broadcasting stations for more information.
•The X42 LCD HDTV’s tuner is designed for HDTV therefore requires a stronger signal than normal TVs. If you cannot achieve that signal level with your antenna or cable, your X42 LCD HDTV might lose picture or sound.
- 29 -
www.SCEPTRE.com