Troubleshooting, No display | ResMed s8 specification

Troubleshooting

If there is a problem, try the following suggestions. If the problem cannot be solved, contact your equipment supplier or ResMed. Do not attempt to open the device.

Problem/Possible CauseSolution

No display

Power is not connected.	Ensure the power cable is connected and the power
	switch (if available) is on.

Insufficient air delivered from S8 Series II device

Ramp or settling time is in use.	Wait for air pressure to build up or change ramp or
	settling time.
Air filter is dirty.	Replace air filter.
Air tubing is kinked or	Straighten or replace tubing.
punctured.
Air tubing not connected	Check air tubing.
properly.
Mask and headgear not	Adjust position of mask and headgear.
positioned correctly.
Cap(s) missing from access	Replace cap(s).
port on mask.
Pressure required for	See your clinician to adjust the pressure.
treatment may have changed.

Device does not start when you breathe into the mask although your clinician has enabled SmartStart.

Power cord not connected	Connect power cord firmly at both ends.
properly.
Power outlet may be faulty.	Try another power outlet.
Leak Alert has been enabled	Contact your clinician.
by your clinician; SmartStart
automatically disabled.
Use of a ResMed Full Face	SmartStart does not work with a full-face mask as the
mask.	anti-asphyxia valve will not allow sufficiently high
	pressure on exhalation.
Breath not deep enough to	Take a deep breath in and out through the mask.
trigger SmartStart.
Excessive leak.	Adjust position of mask and headgear.
	Replace caps if missing from ports on mask.
	Air tubing may not be connected properly. Connect firmly
	at both ends.
	Air tubing may be kinked or punctured. Straighten or
	replace.

English

Troubleshooting 13

s8 specifications

The ResMed S8 Escape is a highly regarded CPAP (Continuous Positive Airway Pressure) device designed for the treatment of obstructive sleep apnea. Known for its reliability and user-friendly features, the S8 Escape is part of ResMed’s S8 series, which combines advanced technologies with an emphasis on patient comfort.

One of the standout features of the S8 Escape is its AutoRamp technology, which helps patients gradually transition into their prescribed pressure settings. Instead of starting at the full pressure immediately, AutoRamp begins at a lower pressure, allowing users to fall asleep comfortably before automatically increasing to the prescribed level. This feature significantly improves the overall user experience as it reduces anxiety associated with the use of CPAP devices.

The S8 Escape also boasts a built-in air filter that enhances air quality and protects the device from dust and other particulates. Additionally, the device is designed for whisper-quiet operation, ensuring that users can sleep soundly without the disruption of noise, which can be a common issue with less advanced models. This creates a more peaceful sleeping environment, both for the user and their bed partner.

Another important characteristic of the S8 Escape is its compact design and lightweight build. It is easily portable, making it an ideal choice for both home use and travel. The device also features a user-friendly interface, with a simple LCD screen that displays essential information such as pressure settings and therapy time. This allows users to track their usage and monitor their therapy progress conveniently.

The S8 Escape offers various pressure settings and is compatible with a wide range of masks, ensuring that users can find the right fit for their individual needs. The device’s advanced monitoring capabilities also help in providing feedback on therapy effectiveness, allowing healthcare professionals to adjust settings if necessary.

In summary, the ResMed S8 Escape is a highly functional and patient-friendly CPAP device, featuring advanced technologies designed to enhance the user experience. Its AutoRamp technology, quiet operation, and compact design make it a popular choice among individuals dealing with obstructive sleep apnea.