Loewe ConceptL32, ConceptL26 manual Directing DVB-T antenna, Switching on/off, Select a TV channel

Page 12

First installation

Daily operation

Directing DVB-T antenna

Note: not with DVB-T stations in GB.

If you use a room antenna to receive one or more DVB-T stations that have picture and sound interference, then you should change the location of where the antenna is set up.

To help you direct your antenna or to help you determine the most suitable loca- tion to set up the antenna, your TV set has a display for the signal quality C/N

Switching on/off

Your TV is equipped with an eco-standby power supply unit. On standby, the power consumption drops to low power. If you want to save even more electric- ity, switch the set off with the mains switch. However, please bear in mind that EPG data (electronic programme guide) will be lost and programmed timer recordings will not be performed by the TV.

and the signal strength Level.

Consult your specialist dealer to find out which channels and frequency bands (VHF or UHF) are used to broadcast the digital TV stations in your area.

On any one channel, several digital stations are broadcast.

Select a TV channel

1.Call the “TV menu“ via the MENU button.

2.Use 34 to select “Settings“, then use 6 to select the menu line underneath.

3.Select “Stations“, then use 6 to select the menu line underneath.

 

TV menu

 

INFO END

 

Settings

 

 

 

 

 

Stations

Parental lock Timer functions Language

 

Manual adjustment

...

 

 

 

 

 

4. Select “Manual adjustment“ and call the menu using OK (not possible for MHEG-5 device versions).

Manual adjustment

 

 

Signal source

DVB-T

DVB-CAntenna/cable (analogue)

OK

Switching off

If the TV set is switched on, you can switch it to standby using the blue ON/OFF button on the remote control. The red lamp on the TV set lights up. If the orange indicator lights up, a timer recording is being made, EPG data is being captured or radio operation without screen display is active.

Switching on the TV set

From standby, it is best to switch the set back on using the blue On/Off button or by using the numeric buttons of the remote control (0 – 99).

The green indicator on the TV set lights up.

Or switch on the TV set with OK, you can then see the station list and select a station.

Switching the radio on

Channel

E 05

Frequency

177.50 MHz

Name

Test

Bandwidth

7 MHz

C/N 96

 

 

Level 99

END

5.For digital stations, select “Signal source – DVB-T“.

6.Use the numerical buttons to specify the corresponding channel number. Depending on the channel selected and country, the system automatically sets the corresponding bandwidth of 7 or 8 MHz. You should only change the bandwidth under special circumstances - if the channel raster in your area is different from the standard.

When you receive a digital station, the system displays the signal quality C/N via a bar/numeric value and the signal strength via Level. The anten- na‘s direction or position is best when the largest values possible are displayed (long bar) for the signal quality and signal strength.

7.Direct the antenna so that the largest numerical value/bar size is reached.

8.If no signal is found in the channel set, you can start the frequency search run by pressing the blue button within the band selected (VHF or UHF).

9.Check the other channels one after another on which digital stations are broadcast terrestrially in your area.

For the weakest station, direct the antenna so that the maximum numerical value/bar size is achieved.

10.After you position or direct the antenna, we recommend to search for all the stations using the “Search wizard“ (TV menu – Settings – Stations – Search wizard).

RADIO With the RADIO button on the remote control.

If you switch off the TV set using the mains switch on the set, the indicator no longer lights up.

If the TV set is switched off via the mains switch, you have to switch it into the standby mode fi rst via the mains switch and then switch it on using one of the above mentioned methods.

- 12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operating instructions Contents Remote control TV functions Alternative Remote controlControl Unit Call the menu Audio input left Video input AVSConnections to rear panel Common Interface 1 CI-SlotWelcome Cleaning DisposalPacking and box SetFor your safety Top of the TV. High levels of moistureTop to ensure suf Is not exposed to directFirst installation Remote controlConnection Using the Conditional Access module Switching onHandling the fabric hose optional Automatic programming Station sortingSwitching on/off Directing DVB-T antennaSelect a TV channel Daily operation Changing stationsBasics about the menu operation Example of the menu operationInfo text indicates which settings you can make in Stations For the info systemThis is how to select the index item OK Use the OK button to call Switch off AutomaticFor the index DisplaysSetting the sound Picture settingsDirect control on TV set How the coloured keys work in TV mode Operating modes TVShow status display Calling the indexCall timer overview Call additional functionsSelect picture format Move picture up/downUnder Settings you will find the following functions DVB subtitlesInstalling new DVB software Removing the CA moduleInserting a new CA module Calling the CA module menuOperating modes PIP Picture in picture PIPSetting the PIP type Switch to small PIPSwitch to split screen Functions in the PIP menuUsing the EPG Operating modes EPGEPG Programme guide To select within the menu lineSwitch on TV when marked Programming recording for recordersEPG menu Selecting providers and stationsOperating modes Teletext Analogue TeletextSelection with the coloured keys Displaying teletext pagesProgramme timer recordings Teletext menuDigital teletext operation only for MHEG-5 device versions Operating modes Radio RadioRadio menu EPG Programme guideLogin and connect equipment Connecting video/DVD recordersOperating additional equipment Video playback Calling AV input via the station listDevice to which the VCR is connected Now you will see the playback from the connected AV deviceAssignment of digital audio inputs and outputs Audio input Audio DigitalAudio output Audio Digital OUT Only required for TV as centre loud speaker Six pin Cinch Cubic plug cableConnecting other audio amplifiers or active speakers Sound menu using the button, select Sound via and then TVSetting colour standard Hdmi DVI connectionVGA/XGA connection Set geometryComponent video connection Sound from PC or Set Top BoxSelect the device to be operated Functions for Loewe video recorders VV 8106, 8136Problem Possible cause Remedy What to do, ifWired Digital Link Plus does not functionReplace the Euro-AV cable That they fall between 1Technical data General dataType Concept L 26 Basic Concept L 32 Basic Electrical data ConnectionsAccessories Retrofitting options Device version / Equipment Item no PIP tuner Digital CommonBasic 65434xxx 65442xxx MHEG-5Service Somara S.A

ConceptL26, ConceptL32Basic, ConceptL26Basic, ConceptL32 specifications

Loewe, a renowned name in the world of premium televisions, has introduced several innovative models designed to enhance the home entertainment experience. Among these, the Loewe ConceptL32 and ConceptL26 series stand out with their unique features, cutting-edge technology, and sleek design.

The ConceptL32 and ConceptL26 are distinguished by their superior visual quality, boasting high-definition displays that deliver stunning picture clarity and vibrant colors. Both models are equipped with Loewe's advanced image processing technology, which optimizes contrast and brightness, ensuring that viewers enjoy a cinematic experience right in their living rooms. The size of the displays is tailored for various living spaces, making them versatile choices for consumers looking for quality screens whether in large or cozy settings.

Another key feature of the Loewe Concept series is its integrated sound systems. The models provide an immersive audio experience, incorporating advanced speaker technology that fills the room with rich, dynamic sound. This ensures that whether users are watching movies, playing games, or listening to music, the audio output complements the exceptional visual quality.

Loewe places a strong emphasis on design, and the Concept series reflects this philosophy. The sleek, modern aesthetic of both the ConceptL32 and ConceptL26, with their minimalist bezels and elegant stands, ensures that they can fit seamlessly into any home décor. Moreover, these models are available in a variety of colors and finishes, allowing users to choose one that best matches their personal style.

Connectivity is another strong point of the Concept series. With multiple HDMI ports and USB inputs, users can easily connect their devices, from gaming consoles to streaming gadgets. The built-in smart features provide access to a plethora of online content including streaming services and apps, making it easier than ever to enjoy a wide range of entertainment options.

The ConceptL32Basic and ConceptL26Basic models offer similar features but are designed with a focus on simplicity and ease of use. These models prioritize straightforward operation, making them ideal for users who prefer a no-fuss approach to modern technology.

In summary, the Loewe ConceptL32, ConceptL26, ConceptL32Basic, and ConceptL26 are exemplary models that combine innovative technology, superior audio-visual capabilities, striking design, and user-friendly features to create an unparalleled home entertainment experience. Whether audiences are cinephiles, gamers, or music lovers, these televisions cater to diverse preferences and elevate the art of viewing.
Top Page Image Contents