Operating modes – TV
Call additional functions
Select additional functions such as Teletext subtitles, Personal teletext pages, Headphone volume, Scan stations and to move the picture up and down.
|
|
|
|
|
|
| Additional functions |
|
| INFO END |
|
| Teletext subtitles | OK | Personal teletext pages | Headphone volume |
|
|
|
|
|
|
|
Call timer overview
If timer recordings have been programmed, you will see when which station is recorded here.
Timer list | Fri 12.09./14:12 |
12.09. | Die Köchin, die Putzfrau und d |
|
|
TEXT Detail | New recording | Change | END |
|
| Delete | INFO |
Select picture format
The TV set sets the best picture format automatically when Auto format is switched on. If you want to set a different format, press this button until the desired format is selected or select the format with 34.
Picture format | 4:3 Panorama Cinema Zoom |
16:9 |
You can switch the panorama picture over to
Switching over: Keep the 
button on the set pressed, at the same time press
the ”Picture format” 
button on the remote control briefly.
Resetting: Press the same button combination again.
Move picture up/down
| To make picture subtitles visible, you can use56to move |
OK | the picture up or down with the picture formats “Panorama“, |
| |
| “Cinema“ and “Zoom“. |
Note: for
TV menu
MENU | Call up the TV menu |
| TV menu |
|
|
| INFO END |
| Picture |
|
|
|
|
| Sound Recording | Connections | Settings | ||
| Picture adjustment | ... |
|
|
|
You will find a description of the picture and sound settings on page 17. The TV menu offers other options for recording, connections and settings of the TV set.
For a recorder that is logged in, you can find the following menus in the “Recording“:
Recording wizard - to programme new timer recordings
• Via EPG • Via teletext • Manual
You will find further information about timer recording on page 30.
Timer list
Here you will find a list of programmes programmed for recording. You can change the recording data or delete programmed recordings and programme new recordings.
For recordings without VPS/PDC, set a lead and lag time here so that the pro- gramme is fully recorded despite any slight differences in the time.
Under “Connections“ you will find the following functions:
New devices/modifications (connection wizard)
The connection wizard helps you connect and log in additional equipment such as video recorders, DVD players/recorders, camcorders/digital cameras, pay TV decoders, equipment with component signals and digital HDMI/DVI signals.
Antenna DVB (only for sets with DVB)
• Antenna
You can find more information on pages 11 and 12.
Digital Link Plus
Transmission of the station data from the TV set to the video/DVD recorder if a recorder with Digital Link Plus is connected.
Miscellaneous (connections)
•Set AV norm for the connections manually (if it is not recognised automati- cally).
•“Assign audio digital signals“ to one of the AV sockets.
•“Allow switching voltage“ to display the signals of the connected device immediately on the screen via Euro AV during playback.
•RGB insertions at AV2 to play back RGB signals at all station storage locations.
•Select decoder stations and set sound encoding.
(1 only for sets with
19 - 