Loewe ConceptL32 manual For your safety, Top of the TV. High levels of moisture, Top to ensure suf

Page 8

For your safety

For your safety and to avoid unnecessary damage to your TV set, please read and observe the following safety instructions:

This TV set is designed exclusively for reception and reproduction of video and audio signals.

This equipment is designed for domestic and

office environments and must not be used

 

in rooms with high humidity (e.g. bathroom,

 

sauna) or high concentrations of dust (e.g.

 

workshops). If the equipment

 

is used in the open air, ensure

 

that it is protected against

 

moisture (rain, drips, splashes,

 

sprayed water or dew). Do

 

not place any containers filled

 

with liquids or lit candles on

LOEWE.

top of the TV. High levels of moisture and

concentrations of dust cause leakage currents in the equipment, which can lead to danger of electric shock or fire.

The manufacturer‘s warranty is only valid for use in the specified permissible environment.

If you have moved the TV set out of the cold into a warm environment, leave it standing for about an hour since condensation may form.

This equipment must only be connected to a mains power supply which has the same voltage and frequency as that specified on the rating plate; use the power cable provided. Incorrect voltages can damage the equipment.

Like all electronic equipment, your TV needs air for cooling. Obstruction of the air circulation can cause fires. Therefore the air vents on the back must always be kept free. Please do not place newspapers or cloths on/over the TV.

If the TV is placed in a

 

 

cabinet or on a shelf,

 

10 cm

leave at least 10 cm at

 

 

the sides and 10 cm at

 

 

the top to ensure suf-

10 cm

10 cm

ficient air circulation. Position the set so that it

is not exposed to direct

LOEWE.

 

sunlight and additional

 

heating from radiators.

 

Prevent any metal parts, needles, paper clips, liquids, wax or the like from getting into the TV set through the air venting slits in the rear panel. This can lead to short-circuits and possibly to fire. If something should get into the inside of the TV set, pull out the plug immediately and notify customer service.

Never remove the back of the TV set yourself. Repair and servicing of your TV set should only be carried out by authorised TV technicians.

Place the TV set on a level, firm base. The set should not protrude at the front when installing in cabinets or shelves.

Only use original accessories if possible, e.g. Loewe wall holders and stands. Never let children handle the TV unattended.

Do not allow children to play in the immediate vicinity of the TV, they could knock, shift or pull it over and injure someone.

Never leave the TV on unsupervised.

Do not install the TV where there may be vibrations. Vibrations can lead to material stress.

Pull out the power and antenna cables during thunderstorms. Surge volt- ages caused by lightning strikes can damage the TV through the antenna system and the mains. Also remove the antenna and mains plugs in long periods of absence.

The mains plug of the TV set must be easily accessible so that the set can be disconnected at any time.

Lay the mains cable in such a way that it will not be damaged. The power cable may not be kinked or laid over sharp edges, not stood on and not ex- posed to chemicals, the latter also applies to the device as a whole. A mains cable with damaged insulation can lead to electric shocks and is a fire risk.

When removing the mains plug, pull the plug housing and not the cable. The wires in the plug could be damaged and cause a short circuit the next time it is plugged in.

The rating plate of the TV is on the rear of the set.

-

Image 8
Contents Operating instructions Contents Remote control TV functions Alternative Remote controlControl Unit Call the menu Audio input left Video input AVS Connections to rear panel Common Interface 1 CI-SlotWelcome Cleaning DisposalPacking and box SetFor your safety Top of the TV. High levels of moistureTop to ensure suf Is not exposed to directConnection First installationRemote control Handling the fabric hose optional Using the Conditional Access moduleSwitching on Automatic programming Station sortingSelect a TV channel Switching on/offDirecting DVB-T antenna Daily operation Changing stationsBasics about the menu operation Example of the menu operationInfo text indicates which settings you can make in Stations For the info systemThis is how to select the index item OK Use the OK button to call Switch off AutomaticFor the index DisplaysDirect control on TV set Setting the soundPicture settings How the coloured keys work in TV mode Operating modes TVShow status display Calling the indexCall timer overview Call additional functionsSelect picture format Move picture up/downUnder Settings you will find the following functions DVB subtitlesInstalling new DVB software Removing the CA moduleInserting a new CA module Calling the CA module menuOperating modes PIP Picture in picture PIPSetting the PIP type Switch to small PIPSwitch to split screen Functions in the PIP menuUsing the EPG Operating modes EPGEPG Programme guide To select within the menu lineSwitch on TV when marked Programming recording for recordersEPG menu Selecting providers and stationsOperating modes Teletext Analogue TeletextSelection with the coloured keys Displaying teletext pagesDigital teletext operation only for MHEG-5 device versions Programme timer recordingsTeletext menu Operating modes Radio RadioRadio menu EPG Programme guideOperating additional equipment Login and connect equipmentConnecting video/DVD recorders Video playback Calling AV input via the station listDevice to which the VCR is connected Now you will see the playback from the connected AV deviceAudio output Audio Digital OUT Assignment of digital audio inputs and outputsAudio input Audio Digital Only required for TV as centre loud speaker Six pin Cinch Cubic plug cableConnecting other audio amplifiers or active speakers Sound menu using the button, select Sound via and then TVSetting colour standard Hdmi DVI connectionVGA/XGA connection Set geometryComponent video connection Sound from PC or Set Top BoxSelect the device to be operated Functions for Loewe video recorders VV 8106, 8136Problem Possible cause Remedy What to do, ifWired Digital Link Plus does not functionReplace the Euro-AV cable That they fall between 1Type Concept L 26 Basic Concept L 32 Basic Technical dataGeneral data Electrical data ConnectionsAccessories Retrofitting options Device version / Equipment Item no PIP tuner Digital CommonBasic 65434xxx 65442xxx MHEG-5Service Somara S.A