Electronic Programme Guide
Calling additional information about the programmes
➠Brief information about some of the programmes is displayed below the programme list of the broadcasts.
You can call detailed information with the TEXT button if this function is offered by the TEXT icon in the lower left.
Programming a recording for a recorder
➠The selection is in the lower programme list, if not, press the blue button.
65Mark the desired programme.
Red button: Starts recording wizard.
Change or confirm timer data if necessary (see page 44, "The direct way to record“).
Then a red dot will be displayed in front of this programme as identification.
Red button: Deletes the already programmed recording of the red marked programme from the timer.
If the timer data have been transferred to an external recorder, then the timer must also be deleted there.
Configuring EPG
Start the EPG menu
➠EPG mode is started,
if not, press the EPG button.
Call the EPG menu.
EPG menu |
| Data capture | INFO | END |
rovider Station selection | OK | Switch on TV when marked | Sortin |
Settings in the EPG menu:
Select Provider (only for analogue stations), Station selec- tion, Data capture, Switch on TV when marked, Sorting.
Explanations of setting possibilities in the EPG menu:
Select provider In analogue TV reception there may possibly be different providers who transmit the EPG data for certain station packages. To get another range of stations, you can change the provider with the Provider selection. If the provider you are looking for is not in the list, then use the yellow button to perform a Provider search.
The stations offered by the provider will be displayed in a list.
Station You can remove certain stations from the programme selection guide. These stations must be deactivated in the Station selection. First, all stations for which programme infor- mation can be provided are marked with a . Stations without a are not included in the programme guide.
With the coloured buttons, you can select or deselect individual stations, select all stations at once or select only the stations in the favourites list.
Marking the stations according to reception ranges:
analogue stations via antenna/cable for the data supplied by the current provider.
digital terrestrial stations
Data capture | If you want to use EPG for analogue and digital stations, |
| select on (for DVB + analogue). If you want to use EPG |
| and only have DVB reception, select on (only for DVB). |
| If you are not using EPG and therefore do not want to |
| receive any EPG data, select off. |
| After making changes in the EPG menu, or each time the |
| power switch has been switched off, the EPG data must |
| first be captured. To do this switch on the device and |
| select (for analogue stations) the station that you have |
| defined as provider, and let the TV set run for about 1 |
| hour with the selected station. Or switch the TV set to |
| standby mode. After 2 minutes the display on the TV |
| lights orange and the EPG data capture begins. When |
| the data capture process has concluded the display will |
| return to red. The data capture process is usually per- |
| formed between 2:00 am and 5:00 am, when the TV |
| set is in standby mode. |
Switch on TV | If the TV set is switched on then if there are memorised |
when marked | programmes the TV set will switch over to these stations. |
| If the TV set is in standby mode when a memorised pro- |
| gramme begins, then you can specify here whether the |
| set should be turned on in this case. If you have set "yes" |
| in the menu, the TV set will be switched on. If you are |
| not in at the time, a safety prompt makes sure that the |
| TV switches off automatically after 5 minutes without |
| your acknowledgement. |
Sorting | The programmes can be sorted either according to their |
| start time (sorting according to start time) or according to |
| stations as in the station list (sorting according to station |
| / favourites list). |
(1 if upgraded |
|
31 -