Loewe 32 manual Sound components wizard, Play sound via active speakers

Page 41

Operating additional equipment

Sound components wizard

The sound components wizard helps you to configure the components used to play the TV sound.

The TV speakers alone or with active subwoofer, active speakers, analogue or digital HiFi/AV amplifier or the Loewe Sound Projector can be configured depending on what you want to use.

The sound components wizard is preset to playback via TV speakers at the factory.

If a Loewe Preceiver Auro with link cable has been connected to the TV set, you can only select between TV speakers and Auro in the sound components wizard.

Upgradable Audio AC3 / dts / Decoder

Your TV set may be equipped with an integrated Dolby Digital Decoder depending on the variant. This system has been introduced to the DVD video range and digital TV stations can also broadcast in digital multi- channel sound.

For playback of 5 audio channels the surround sound is reinforced by the deepest frequencies from the subwoofer channel (SUB), (5.1 reproduction

=5 audio channels and 1 subwoofer). All 5 audio channels are reproduced with the full frequency range from 20- 20,000 hertz and generate the original theatre effect.

The upgrade kit decodes Dolby Digital, dts and MPEG. Stereo signals can also be reproduced on multi-channel via Dolby Pro Logic and Dolby Pro Logic II. This is regardless of whether the signal is transmitted by an external device or received by the TV set.

Equipment / upgrade of the different set variants and accessories see page 58 and 59.

Play sound via active speakers

Connect your active speakers to the audio outputs AUDIO OUT L/R of the TV set with cinch cables. Switch the TV set to playback via active speakers.

Call TV menu.

34Select Connections,

6 go to the menu line below.

34Select Sound components.

OK calls the sound components wizard.

Select Active speakers.

Sound components

Sound playback via ...

TV speakers

TV speakers + active subwoofer

 

Active speakers

OK

HiFi/AV amplifier

Sound projector

END

 

Sound projector or TV speakers (swichable)

 

OK End of wizard

 

OK Exit wizard.

Play sound via TV speakers and active subwoofer

Connect your active subwoofer to one of the audio outputs AUDIO OUT L/R with cinch cables.

Set the TV set to playback via TV speakers and an active subwoofer.

Call TV menu.

34Select Connections,

6 go to the menu line below.

34Select Sound components.

OK calls the sound components wizard.

Select TV speakers + active subwoofer.

Sound components

Sound playback via ...

TV speakers

TV speakers + active subwoofer

OK

Active speakers

 

HiFi/AV amplifier

END

Sound projector

 

Sound projector or TV speakers (swichable)

 

OK Proceed

 

OK continue to the settings for the subwoofer.

Explanations of the setting options:

Adjust Adapt the volume of the subwoofer to the volume of the subwoofer level TV speakers.

Specify Set the transfer frequency of the subwoofer so that it crossover corresponds to the lower limit frequency of the TV speak- frequency ers. 90 Hz in this device.

Subwoofer Switch to a station with music or start playback with phase music on a DVD player with P+/P–.

Test both values (and 180°) with 34and select the one where you get a clearer bass reproduction.

41 -

Image 41
Contents Operating instructions Contents Remote control TV functions Button M Control unit front side of the deviceDisplay Display DR+SD/HD-COMPONENT in Cb/Pb-Cr/Pr-Y component video inputs Factory settingsConnections rear side of the device Connect Antenna/cable Connections rear side of the device Connect 37 / ConnectWelcome Info display and TV index Operating convenience with wizardsWizards in overview Power supply For your safetyAir circulation and high temperatures Proper use and environmental conditionsVolume Repairs and accessoriesCleaning SupervisionInstalling the TV set Initial installationPreparing the remote control unit Connecting the TV setTurning the set on/off First installation wizardDVB-S line Antenna/cable analogue analogue stations viaPositioning/aligning the DVB-T antenna Info display Operating convenienceGeneral information on menu operation Assist+ menu Index in the TV setRadio menu Overview diagram TV menu Overview diagramSelect station Daily operationWith the favourites lists Select video sourceExplanation of the favourites lists Explanation of the icons following station namesAdjusting the sound Operation without remote control Adjusting the pictureButton functions Status display Other setting options for DVB stationsExplanations of the sound identification Additional selection possibilities for DVB stationsExplanations of some search settings Search/update stations Search wizardManaging stations TV stationsGo to the menu line below 34Select Stations Search/update station manual searchStation Input of the colour standard of the stationRestore stations Change, delete, move, rename, restore stationGreen button Starts Restore stations 34Select Change stationsPut together / change favourites list Picture in Picture PIP Picture in PictureConfigure Picture in Picture PIP mode Electronic Programme Guide EPG Electronic Programme GuideConfiguring EPG Teletext TeletextDigital teletext MHEG-5 Teletext menuConditional Access module CA module Software update Radio Radio modeOperating additional equipment Connecting additional devices to the TV setDevice connection wizard Call TV menu 34Select ConnectionsConnecting an antenna to the DVD/video recorder Explanations of important settingsConnection variants of a DVD/video recorder Manual recorder station searchConnecting devices to the PC in connection and playback Yellow button Activate COMP. Digital audio signal34Select New devices/modifications Play sound via TV speakers and active subwoofer Sound components wizardPlay sound via active speakers Explanations of the setting possibilities Connecting audio amplifiersConnecting digital audio amplifiers Connecting analogue audio amplifiersRS-232C interface upgradable interface Assignment of the digital audio inputAudio connection in Hdmi DVI devices Direct way to record Timer recording with external devices PhotoViewer Marking photos for slide show Open folderStart slide show Calling the PhotoViewer menuMusicBox MusicBox browse/sort Call / play play list MusicBox Play listsCreate new play list / add title Blue button Call Create play listBlue button Starts Rename play list Rename play listsMove titles in the play lists / change order Yellow button Starts Move titleOperating Loewe equipment Card Reader operation ViewVision DR+ „Home menu Functions for the Loewe DVD player Auro 2216 PS, 8116 DTUser interface of loaded DVD Menu original / playlist Basic adjustment left Basic adjustment rightSpecifying the switch off position Activating the switch-off position Call TV menuTroubleshooting Amplifier Connection diagramWith Teletext various character sets are General data Technical dataElectrical data Connections max. equipmentAccessories AccessoriesSetup possibilities Equipment variants and upgrade kits Glossary Conditional Access module See CA moduleCI slot See Common Interface Electronic Programme Guide See EPGPicture in Picture See PIP JPG See JpegTV digital TV analogueHD analogue HD digitalIndex Service
Related manuals
Manual 64 pages 20.08 Kb

32 specifications

Loewe 42, 37, and 32 are a series of cutting-edge televisions from the renowned German electronics manufacturer Loewe, known for their premium design and innovative technology. These models are carefully crafted to offer an immersive viewing experience, combining stunning visual quality with advanced features tailored for modern entertainment needs.

The Loewe 42 is equipped with a 42-inch display, providing an ideal size for medium to large living spaces. The model employs a 4K Ultra HD resolution, ensuring that content is delivered with remarkable clarity and detail. This television also features HDR technology, which enhances color contrast and brightness, allowing viewers to enjoy deeper blacks and brighter whites, resulting in a more realistic picture. Loewe's proprietary image processing system optimizes every frame, ensuring that fast-moving scenes are rendered smoothly without motion blur.

Similarly, the Loewe 37 offers a slightly smaller footprint with its 37-inch display, making it perfect for cozy environments such as bedrooms or smaller living rooms. It retains many of the high-end features seen in its larger counterpart, including the same 4K Ultra HD resolution and HDR capabilities. Its compact size doesn’t compromise on audio quality, as it includes integrated speakers that deliver clear and rich sound, further enhancing the viewing experience.

The Loewe 32, the smallest of the trio, with its 32-inch screen, is designed for flexibility fitting into spaces where larger televisions may be impractical. Despite its size, the model boasts impressive picture performance through its high-definition display and advanced processing technology.

All three models support smart TV functionality, providing access to a wide range of streaming services and apps. Users can effortlessly navigate through their favorite content with an intuitive user interface. Additionally, Loewe has incorporated voice control and compatibility with various smart home systems, allowing remote control and integration within connected environments.

In terms of design, Loewe televisions are as much a statement piece as they are functional electronics. With sleek lines and premium materials, they are designed to blend seamlessly into any decor. The screens can be wall-mounted or placed on stylish stands, catering to different preferences and spaces.

In conclusion, the Loewe 42, 37, and 32 models exemplify the brand's commitment to luxury, combining top-notch picture and sound quality with elegant design and smart technologies. Whether for a home theater setup or a cozy corner, these televisions stand out as excellent choices for discerning viewers.