13.Colour Standard
☞Some of the menu items are not available in a 2 ** menu.
Normally, your TV set will automatically detect the colour standard (PAL, SECAM, NTSC, NTSC44, PAL60, PALM or Pal N) transmitted by each sta- tion. If this does not function correctly for some programme positions, you can select the colour standard manually.
The factory setting for the colour standard is "Automatic".
Opening the menu
MENU
F2
Setting the colour standard:
• Select the programme position for |
which you wish to select the colour |
standard. |
• Press the "MENU" key. |
The TV menu appears on the screen. |
• Press the white key . The station |
table is displayed with the currently |
active programme position highligh- |
ted. |
• Press the F2 key to enable editing of |
: select OK : go to the
0010 Hessen 3
0009 Südwest
0008 MDR
0007 PRO 7
0006 RTL 2
0005 RTL
0004 SAT 1
0003 Bayern 3
0002 ZDF
0001 ARD
Sound corrections
Colour standard
Picture quality
Picture correct.
Enter logo
Frequency/channel
the station table. |
settings.
Colour standard Auto. mode
• Press the cursor control key to move to the subjects side.
•Use the corresponding numeric key (in the example: ) to select "Colour standard".
•In the setting window, use the - + key to change the setting.
•Press the "OK" key to save the new setting.
•Press the "EXIT" key to close the TV menu.
OK
EXIT
The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.
31