20.2 Collecting EPG Data
The Electronic Programme Guides are broadcast by several different stations, and the information is therefore present- ed in various layouts. You can thus choo- se between different EPGs with different appearances.
•TV set with a single tuner: select the EPG programme position and leave it selected for 30 minutes
•TV set with two tuners: the TV set col- lects the EPG data with the aid of the second tuner.
Special notes:
All stations which are found by a station search are displayed in the station table and also listed in the EPG. Stations which carry two different programmes at different times of the day must be stored in two programme positions (see Section 24).
You can select which stations are to be listed in the EPG.
Normally, the data for all stations are collected and displayed. If you wish to exclude certain stations from the EPG, proceed as follows:
•Press the "MENU" key to open the TV menu.
•Press the white key to display the menu station table with the active pro- gramme position marked.
•Press the F2 key to enable editing of the station table.
• Press the cursor control key to move to the subjects list.
• Press numeric key to delete the mark (x) at the beginning of the line "Include station in EPG".
•If you wish to exclude further stations from the EPG, use the cursor control
keys to select each station and repeat the above step.
The data collection operation is interrup- ted if:
-the Teletext function is called;
-a recording is programmed in the menu "AV recording";
-a "timer recording” is active or will start within one hour;
-the Teletext function "Subtitles" is acti- vated.
If you switch the TV set to the standby state during the
Not possible with an external receiver !
50