22.2 Setting Stations
Automatic DVB-T station search
The
If you are not satisfied with the order in which the stations are displayed, you can move them to other positions or delete unwanted stations (see Section 24., "Sorting stations".
Executing the automatic station search
Opening the menu
MENU
• Press the "MENU" key to open the TV menu.
•Press the red key to open the menu "Configuration".
•Use the corresponding numeric key (in the example: ) to select "
•In the setting window "Antenna", you can switch the supply voltage for an antenna on or off with the - + key.
Normal setting = Off !
The setting "On" may be used only if you have an active indoor antenna which needs a supply voltage for its internal amplifier.
•Use the corresponding numeric key (in the example: ) to select "Search set- tings".
Change with the |
numeric keys or |
– + . Accept |
value with OK |
F1➔ |
|
Function for F3 |
|
Function for F2 |
|
Function for F1 |
|
EURO sockets |
|
| |
General settings | |
Manuall search | |
Country | Automatic search |
Language | Search settings |
Operating | Antenna |
Start stadion search
•In the setting window, use the - + key to select one of the following:
All = search for all stations.
FTA only = search for only unencrypted
FTA +CICAM = search for FTA stations and sta- tions which can be decoded with a CI module (accessory).
•Press the "OK" key and use the corresponding numeric key (in the example: ) to select "Automatic search".
•Press the "OK" key to start the search. The TV set now searches for available stations.
OK
The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.
59