1. Setting up
The Plasma TV Set consists of the components: plasma monitor, stand, wall mounting bracket, two loudspeakers with bases and the tuner box.
Fitting the base
The stand has two vertical panels at the front and back. The (higher) rear panel, with a slot for the cables, is secured with four screws and must be removed before the plasma TV set is mounted on the stand.
Slide the stand into the guides on the rear of the TV set and secure it carefully with four screws (M5 x 20 mm).
Plug in the power cable and the cable to the tuner box, lay them through the slot in the rear panel and secure the panel to the rear of the stand.
Front panel, fixed
Cable slot | Rear panel, removed |
Left loudspeaker
Plasma monitor
|
| Right loudspeaker | 4 screws |
|
| M5 x 12mm | |
|
|
| |
Stand | 4 screws | Loudspeaker bracket | |
|
|
| |
M5 x 20mm
55