Disassembly/Assembly, Base | Makita CC300D (CC01*1) specs

P 3/ 10

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-1. Base

DISASSEMBLING

(1)The machine is fixed to Base assembly with M5x10 Thumb screw at the rear side, and with M5 (+) Pan head screw and M5-8 Hex nut at the front side. Separate the machine from Base assembly. (Fig. 2)

Fig. 2

Flat	Depth guide
washer 5

Spring washer 5

M5x10 Thumb screw

Unscrew M5x10 Thumb screw from Depth guide.

Note: Be careful not to lose Spring washer 5 and Flat washer 5.

Wrench 8	M5-8
	Hex lock nut

M5 (+) Pan head screw

Loosen M5 (+) Pan head screw while holding M5-8 Hex lock nut with Wrench 8.

(2)Remove Angular guide and Depth guide. (Fig. 3) Base can be now replaced with new one.

Fig. 3

Depth guide Disassemble the hinge portion by removing Stop ring E-3 and Pin 4.

Pin 4

Depth guide

Stop ring E-3

Base

Angular Guide

1.Remove M5x10 Thumb screw, Spring washer 5 and Flat washer 5.

2.Disassemble the hinge portion by removing Stop ring E-3 and Pin 5.

Angular guide

Pin 5

Stop ring E-3

Flat washer 5 Spring washer 5

M5x10 Thumb screw

ASSEMBLING

(1)Fix Depth guide to Base with Pin 4 through Depth guide and Base from the external side. Secure them with Stop ring E-3. (Fig. 4)

(2)Fix Angular guide to Base with Pin 5 through Angular guide and Base from the internal side. Secure them with Stop ring E-3. (Fig. 3)

(3)Fix M5x10 Thumb screw through Spring washer 5 and Flat washer 5 to Base and Angular guide. (Fig. 3)

(4)Assemble Base to the machine. (Fig. 2)

Fig. 4

Depth guide

Stop ring E-3

Pin 4

Base