Pixel Magic Systems MTV5000 specifications Network Setup, Firmware Upgrade

Page 28

8 System Operatons

8.1Network Setup

Get IP Address from DHCP Server

The most common way to get Magic TV™ on your network is to get the IP information from a DHCP Server (usually on a network router).

After selecting this option, Magic TV™ will start searching for the IP information.

If found, a message will appear and selecting “Save and exit” will finish the process.

If no DHCP server is found, please check that your network supports DHCP and that your network cable is connected correctly at both ends.

Restart Magic TV™ for it to be seen by the network.

Assign Static IP Address

Select this option if your network doesn’t support DHCP, or you would rather assign a particular IP Address to Magic TV™.

You will be asked to input the following information:

IP Address

Subnet Mask

Gateway Address – (often the IP Address of your router)

DNS Address – (often the IP Address of your router)

Please refer to your network equipment and computer’s documentation for information about IP settings.

Use the number keys on the remote control to enter the numbers directly.

Restart Magic TV™ for it to be seen by the network.

8.2Firmware Upgrade

It is possible that these updates will provide features not covered in this guide. Details of new features will be available at www.magictv.com/en/support.html

Firmware upgrade via USB

Step 1: Firmware Version Check

On Magic TV™, go to Settings System System Info. The installed firmware version and date will be shown

If the firmware available for download is newer than the version installed in your Magic TV™ (i.e. a higher version number), continue to the next section

Step 2: Downloading and transferring the new firmware

Download the new firmware zip file from the www.magictv.com website to a PC

Unzip the file and you should see the firmware file MTV5000-(version-number).upg

Transfer the unzipped file to a portable USB storage device

Connect this portable USB device to one of the Magic TV™ USB ports

System Operatons 8

Step 3: Updating Magic TV™

Navigate to Settings System Firmware Upgrade

Magic TV™ should report that a new firmware has been found

Select ‘Start upgrade’ and Magic TV™ will begin the upgrade process and show a progress bar

Caution: it is important that the power to Magic TV™ is not interrupted during the upgrade process

Finish: Once Magic TV™ has been upgraded, it will restart automatically.

Firmware upgrade Over-The-Air (OTA)

If a firmware upgrade is available Over-The-Air, Magic TV™ will download the firmware from the TV broadcast. When Magic TV™ is ready to perform the upgrade, a message will be shown when you next switch on. Follow the onscreen instructions to complete the upgrade.

Caution: it is important that the power to Magic TV™ is not interrupted during the upgrade process.

Once Magic TV™ has been upgraded, it will restart automatically.

54

55

Image 28
Contents Owners Guide Safety Information Additional Safety Instructions Table of ContentsWelcome Package Contents Basic DefinitionsTour of Magic TV Remote Control Programming the Remote ControlInserting the Batteries BacklightRear Panel Cabling Front Panel DisplayPower and Aerial/Antenna Connections Direct Connection to a TVAudio for HDTVs without Hdmi Connection Via an AV ReceiverVideo + Audio for Hdmi equipped receivers and HDTVs Other Setup Options Network connection for Interactive ServicesCongratulations Video for receivers or HDTVs without HdmiGuided Setup Welcome to Magic TV Guided Setup Getting a PictureViewing Live TV Guided setup is now completeStep Scan for channels automatically Interactive Services Remote Control ShortcutsSimple Operations Info Banner current program information Changing ChannelsElectronic Programme Guide EPG EPG ShortcutsVertical EPG Horizontal EPGRecording and Playback Aspect Ratio CorrectionInstant Recording Basic Magic TV recording termsRecording from the EPG Timer Recording Recording Priorities and ConflictsBrowsing Categories can be Browsing Recorded ProgrammesProgramme list Managing Recorded Programmes Playback of Recorded ProgrammesOrganising programmes into folders Deleting and undeleting filesTimeShifting & Pausing Live TV Magic TV SettingsPlayback Timebar Info Format VideoAudio Channel SetupRecording Guided Setup SystemSystem Operations Network Setup Firmware UpgradeTroubleshooting Troubleshooting Rescue Procedure from firmware corruption Setting the Output Format fromFront panel Support & Warranty Support & Warranty Product Support

MTV5000 specifications

The Pixel Magic Systems MTV5000 is a state-of-the-art video processing and media playback system designed for high-demand broadcast environments. This advanced multimedia solution combines cutting-edge technology and robust features to ensure the seamless transmission and playback of content across various platforms.

One of the hallmark features of the MTV5000 is its powerful processing capabilities. It employs advanced algorithms that enable real-time video processing, ensuring that the content delivered is of the highest quality. With support for various formats, including SD, HD, and 4K UHD resolutions, the MTV5000 is designed to adapt to the evolving needs of broadcasters and content creators.

The system is equipped with a versatile input and output architecture. It supports a wide range of connectivity options, including HDMI, SDI, and IP streaming, allowing for flexible integration into existing workflows. Moreover, the MTV5000 is designed with redundancy in mind, featuring dual power supplies and hot-swappable components, which enhances reliability and uptime in mission-critical applications.

One of the standout technologies utilized by the MTV5000 is its advanced video codec support. The system is compatible with industry-leading compression standards such as H.264 and H.265, enabling efficient encoding and decoding of video streams. This not only optimizes bandwidth usage but also delivers high-quality visuals even in challenging network conditions.

Another key feature of the MTV5000 is its intuitive user interface, which simplifies the operation of complex video management tasks. Users can easily configure settings, monitor system performance, and manage media files through a streamlined dashboard. This ease of use is a crucial factor for live event productions where quick decision-making is essential.

Additionally, the MTV5000 is equipped with robust content management capabilities. It allows for the organized storage and retrieval of media files, facilitating seamless playback and scheduling. The system also supports customizable playlists, ensuring that content can be easily curated for specific events or broadcasts.

In conclusion, the Pixel Magic Systems MTV5000 is a powerful and flexible multimedia solution that caters to the needs of modern broadcasting. With its advanced processing technologies, broad connectivity options, and user-friendly interface, it stands out as a top choice for media professionals seeking reliability and high performance in their video production and playback workflows.