Panasonic AJ-HD3700B manual Recording, Preparation ∑ Release the recording inhibit mode

Page 22

Recording

Preparation

∑Release the recording inhibit mode

≥Confirm that the REC INHIBIT lamp has gone out.

REC INHIBIT

If the lamp has not gone out, set the positions of the cassette’s accidental erasure prevention pins and the F13 (REC INH) set- ting on the HOME menu to the recording enabled status.

∑Selecting the input signals and adjusting their levels

≥Select the video input signal (INT SG or DIGITAL) on the VIDEO IN menu.

≥Select the audio input signal on the AUDIO IN PCM menu and the AUDIO IN CUE menu. ≥Adjust the audio input signal level on the AUDIO IN menu.

Adjust the audio input signal levels for the digital audio channels CH1 to CH4 (or CH1-CH8 when the 8-channel format has been selected) and for analog cue.

Normally, UNITY should be selected.

≥When adjusting the recording levels, select the channel whose level is to be adjusted using the AUDIO IN menu (for example, to adjust the PCM CH1 level, press the F1 key to set to white- on-black display), and adjust the levels using the ADJUST con- trol in such a way that 0 dB is not exceeded for the digital signals and j20 dB is not exceeded for the analog cue signal.

OVER	≥The OVER display lights when the recording level is too high.

≥The level meter display can be switched.

The level meter display can be set to FULL or FINE using the F7 (SCALE) key on the AUDIO IN SET UP menu or the F7 (SCALE) key on the AUDIO OUT SET UP menu.

How to display the ≥VIDEO IN menu:

≥AUDIO IN menu:

≥AUDIO OUT menu:

menus:

VIDEO IN

AUDIO IN

AUDIO OUT

≥AUDIO IN SET UP menu:

≥AUDIO IN PCM menu:

≥AUDIO IN CUE menu:

#

#

#

AUDIO IN

F8

AUDIO IN

F6

AUDIO IN

F7

– 22 –

Image 22

Contents Operating Instructions Hardware Is the safety information For your safety GeneralOperating precaution For your safety FCC NoteFor your safety Europe For Your Safety Please Read the Following Text CarefullyContents Features Picture/sound quality at a reasonable priceOperation and maintenance Specifications and interfacesSlow motion, search and editing functions Controls and their functions Audio Monitor1415 16 Cursor≥FROM ≥COPY ≥ENT≥BS UNITY/VAR28 29 32 TC/CHR SET UP Test DiagVideo Video OUT Audio Audio OUT Button After editing Shtl button JOG button VAR button Search dialEntry button 44454647484950 Connectors BNCt4 Power supply partDigital signal input/output section FuseAnalog input/output section 1513141617CUE OUT Remote Remote control sectionParallel Connections Connection for a single unitConnection for 2 units Connection with an editing controller Tapes ONoteNRecording Preparation ∑ Release the recording inhibit mode∑ Selecting the input signals and adjusting their levels ≥Confirm that the REC Inhibit lamp has gone outPreparation ∑ Setting the time code OperationSimultaneous playback monitoring ∑ Video monitoring ∑ Checking the input signals∑ Audio monitoring How to display the ≥SYSTEM SET UP menu Menus Home Audio TC/CHR Recording Playback ∑ Monitoring the audio signals∑ Adjusting the audio level Press the Play buttonBasic operations ∑ Stop∑ Shuttle Shtl ∑ Jog≥Preset variable mode ∑ Variable VAR∑ Tape speed override TSO function When TC Input is set to the Standard mode∑ Cue Press the F key and Preroll button together. This results When TC Input is set to the Reverse modeCeding the cue point by the preroll time Cue-up operationEnter the new value with the number keys ∑ Correction of the cue pointMove the cursor to the place which is to be corrected Press the ENT key ≥Cue points cannot be clearedManual editing Manual editing Mode Fade Manual audio cross editingAutomatic insert/assemble editing ONoteN Audio split editing ONotesNOUT point preview Set the F3 W/PLYR key to OFF Variable memory FunctionSet the F4 VAR Memo key to on Plyr Connector signals ∑ Parallel I/O 50P connector Pin no Signal Direction Type Description≥50P error status output table FF Status Output Activel Signal Pin No ∑ Operation Video head cleaning∑ Maintenance ∑ StorageRack-mounting Troubleshooting How to eject the tape in an emergencySyscon microcomputer DIP switch specifications DIP switchAV microcomputer DIP switch specifications Servo microcomputer DIP switch specificationsSpecifications GeneralVideo adjustment ranges Input connectorsOutput connectors Video systemAudio Audio input connectorsAudio output connectors Cue trackAccessory supplied Audio adjustment rangesOther input/output signals Optional accessoryPage Panasonic Broadcast Europe