Panasonic AJ-HD3700B Simultaneous playback monitoring ∑ Video monitoring, ∑ Audio monitoring

Page 24

Recording

Simultaneous playback monitoring

∑Video monitoring

≥Set VIDEO during recording to TAPE on the VIDEO OUT HD SET UP STATE menu.

VIDEO

REC

TAPE

∑Audio monitoring

≥Set AUDIO during recording to TAPE on the AUDIO OUT SET UP STATE menu.

VIDEO

D. AUDIO

REC

TAPE

TAPE

≥The digital audio and the digital video signals are interlinked at all times. They can not be set separately.

≥Simultaneous playback of the analog cue signal is not possible. ≥Simultaneous playback monitoring is not possible when the F1

(OUTPUT) key on the HOME menu is set to EE.

≥Even when the state menu setting is EE1 or EE2, simultaneous playback monitoring of both the video and audio signals is pos- sible by setting the F1 (OUTPUT) key on the HOME menu to TAPE.

∑Checking the input signals

≥To monitor the input signals during recording:

(1)Connect a TV monitor to the serial monitor connector. Connect the audio monitor connector to the monitor speaker.

(2)Press the INPUT CHECK button.

INPUT CHECK

While this button is held down, the video signal can be checked using the serial monitor output connector.

≥Only the audio signal selected by the L and R buttons can be monitored (via the audio monitor connector or the headphone connector).

*In the HD mode, only the HD-SDI monitor output can be switched to the input signals; in the SD mode, only the SD-SDI monitor output and VIDEO3 output can be switched to the input signals.

How to display the ≥STATE menu:

menus:

VIDEO OUT

≥or

AUDIO OUT

#F8 # F12

#F8 # F12

≥HOME menu:

HOME

– 24 –

Image 24

Contents Operating Instructions Hardware For your safety General Is the safety informationOperating precaution For your safety FCC NoteFor your safety Europe For Your Safety Please Read the Following Text CarefullyContents Features Picture/sound quality at a reasonable priceSpecifications and interfaces Operation and maintenanceSlow motion, search and editing functions Controls and their functions Audio Monitor1415 16 Cursor≥ENT ≥BS≥FROM ≥COPY UNITY/VAR32 TC/CHR SET UP Test Diag 28 29Video Video OUT Audio Audio OUT Shtl button JOG button VAR button Search dial Button After editingEntry button 44454647484950 Power supply part Digital signal input/output sectionConnectors BNCt4 FuseAnalog input/output section 1513141617CUE OUT Remote control section RemoteParallel Connections Connection for a single unitConnection for 2 units Connection with an editing controller Tapes ONoteNPreparation ∑ Release the recording inhibit mode ∑ Selecting the input signals and adjusting their levelsRecording ≥Confirm that the REC Inhibit lamp has gone outPreparation ∑ Setting the time code Operation∑ Checking the input signals Simultaneous playback monitoring ∑ Video monitoring∑ Audio monitoring How to display the ≥SYSTEM SET UP menu Menus Home Audio TC/CHR Recording ∑ Monitoring the audio signals ∑ Adjusting the audio levelPlayback Press the Play buttonBasic operations ∑ Stop∑ Shuttle Shtl ∑ Jog≥Preset variable mode ∑ Variable VARWhen TC Input is set to the Standard mode ∑ Tape speed override TSO function∑ Cue When TC Input is set to the Reverse mode Ceding the cue point by the preroll timePress the F key and Preroll button together. This results Cue-up operation∑ Correction of the cue point Move the cursor to the place which is to be correctedEnter the new value with the number keys Press the ENT key ≥Cue points cannot be clearedManual editing Manual editing Mode Fade Manual audio cross editingAutomatic insert/assemble editing ONoteN Audio split editing ONotesNOUT point preview Variable memory Function Set the F3 W/PLYR key to OFFSet the F4 VAR Memo key to on Plyr Connector signals ∑ Parallel I/O 50P connector Pin no Signal Direction Type Description≥50P error status output table FF Status Output Activel Signal Pin No Video head cleaning ∑ Maintenance∑ Operation ∑ StorageRack-mounting Troubleshooting How to eject the tape in an emergencyDIP switch AV microcomputer DIP switch specificationsSyscon microcomputer DIP switch specifications Servo microcomputer DIP switch specificationsSpecifications GeneralInput connectors Output connectorsVideo adjustment ranges Video systemAudio input connectors Audio output connectorsAudio Cue trackAudio adjustment ranges Other input/output signalsAccessory supplied Optional accessoryPage Panasonic Broadcast Europe