Panasonic AJ-HD3700B manual ∑ Variable VAR, ≥Preset variable mode

Page 31

Basic operations

Variable (VAR)

The variable mode is a low-speed version of the shuttle mode.

This operation may be initiated from STOP or PLAY mode or during normal recording.

VAR (1) The unit is placed in the variable mode when the VAR button is pressed and the lamp lights.

(2) Turn the search dial.

The tape speed changes depending on the angle by which the dial is turned, and it is displayed on the search indicator.

The tape protection mode is established after the still-picture holding time has elapsed. (This time can be set using the F12 (STILL) key on the HOME SET UP menu and ADJUST con- trol.)

Turning the dial enables shuttle operations across a range from j1 to i2 times of the normal tape speed. The audio signals for all channels are output from the AUDIO OUT connectors.

The maximum speed can be set by pressing the F12 (VAR MAX SP) key on the PANEL SET UP menu.

(3)When the STOP, FF, REW, PLAY, JOG, or SHTL button is pressed, operation is directly transferred to the mode that corresponds to the respective button.

Preset variable mode

When the variable speed is preset, playback starts at the set speed when the VAR button is pressed.

(1)Set the desired speed by turning the search dial.

The tape speed changes depending on the angle by which the dial is turned. The speed is displayed on the search indicator.

(2)Press the VAR button. (The VAR lamp lights.) Playback will start at the set speed.

(3)To release the preset variable mode, turn the search dial. The normal variable mode will be established.

The preset variable mode can be operated only in STOP or PLAY mode or during normal recording.

How to display the PANEL SET UP menu:

HOME SET UP menu:

menus:

 

#

 

 

 

 

# F8

SET UP

F11

 

 

HOME

 

 

 

– 31 –

Image 31
Contents Operating Instructions Hardware Is the safety information For your safety GeneralOperating precaution FCC Note For your safetyFor Your Safety Please Read the Following Text Carefully For your safety EuropeContents Picture/sound quality at a reasonable price FeaturesOperation and maintenance Specifications and interfacesSlow motion, search and editing functions Audio Monitor Controls and their functionsCursor 1415 16UNITY/VAR ≥ENT≥BS ≥FROM ≥COPY28 29 32 TC/CHR SET UP Test DiagVideo Video OUT Audio Audio OUT Button After editing Shtl button JOG button VAR button Search dialEntry button 44454647484950 Fuse Power supply partDigital signal input/output section Connectors BNCt41513141617 Analog input/output sectionCUE OUT Remote Remote control sectionParallel Connection for a single unit ConnectionsConnection for 2 units Connection with an editing controller ONoteN Tapes≥Confirm that the REC Inhibit lamp has gone out Preparation ∑ Release the recording inhibit mode∑ Selecting the input signals and adjusting their levels RecordingOperation Preparation ∑ Setting the time codeSimultaneous playback monitoring ∑ Video monitoring ∑ Checking the input signals∑ Audio monitoring How to display the ≥SYSTEM SET UP menu Menus Home Audio TC/CHR Recording Press the Play button ∑ Monitoring the audio signals∑ Adjusting the audio level Playback∑ Stop Basic operations∑ Jog ∑ Shuttle Shtl∑ Variable VAR ≥Preset variable mode∑ Tape speed override TSO function When TC Input is set to the Standard mode∑ Cue Cue-up operation When TC Input is set to the Reverse modeCeding the cue point by the preroll time Press the F key and Preroll button together. This resultsPress the ENT key ≥Cue points cannot be cleared ∑ Correction of the cue pointMove the cursor to the place which is to be corrected Enter the new value with the number keysManual editing Manual editing Manual audio cross editing Mode FadeAutomatic insert/assemble editing ONoteN ONotesN Audio split editingOUT point preview Set the F3 W/PLYR key to OFF Variable memory FunctionSet the F4 VAR Memo key to on Plyr Connector signals Pin no Signal Direction Type Description ∑ Parallel I/O 50P connector≥50P error status output table FF Status Output Activel Signal Pin No ∑ Storage Video head cleaning∑ Maintenance ∑ OperationRack-mounting How to eject the tape in an emergency TroubleshootingServo microcomputer DIP switch specifications DIP switchAV microcomputer DIP switch specifications Syscon microcomputer DIP switch specificationsGeneral SpecificationsVideo system Input connectorsOutput connectors Video adjustment rangesCue track Audio input connectorsAudio output connectors AudioOptional accessory Audio adjustment rangesOther input/output signals Accessory suppliedPage Panasonic Broadcast Europe