Panasonic AJ-HD3700B manual ∑ Tape speed override TSO function, ∑ Cue

Basic operations

∑Tape speed override (TSO) function

This is a function for finely adjusting the normal playback speed in the range of n15%.

PLAY

∑Cue

(1)Press the PLAY button. Normal playback starts.

(2)Turn the search dial while pressing the PLAY button, or press the i or j keys. When using the search dial, the tape speed changes depending on the angle to which the search dial is turned. When using the i or j keys, the tape speed changes according to how long the key is pressed continously. The speed is displayed in numeric values on the search indi- cator.

(3)To return to normal playback, release the PLAY button.

This function sets any point on the tape for preroll and search operations.

When TC INPUT is set to the STANDARD mode*

(1) Press the cursor center key to display the cursor. The time code value will be highlighted.

Cursor center key

LTCR

00 : 00 : 00 : 00

Cursor key Cursor

(2)Move the cursor with the cursor key (4) to the CUE TIME display section. The cue display section will be highlighted.

CUE TIME

H M S F

Cursor

(3)Press the cursor center key again to change it to a bar cursor. Enter the cue point with the number keys.

0	0	4	4	≥Cue points also can be entered by pressing the ENTRY button.
				In this case, the time data of the current tape position will be
0	7	0	4	entered.

ENTRY

CUE TIME

00 H 44 M 07 S 04 F

(4)Press the ENT key.

The cursor will disappear.

(5)Press the PREROLL button.

≥When the PREROLL button is pressed, cue-up operation will

PREROLL

start, and the tape will stop at the preroll point (the point pre- ceding the cue point by the preroll time).

≥To stop at the cue point, either set the preroll time to “0” or press the F key and PREROLL button together. (This results in the cue-up operation.)

*The STANDARD mode is set using the F9 key on the PANEL SET UP menu. (This key can be set in either the STANDARD or REVERSE mode.)

– 32 –