Basic operations
∑Correction of the cue point
When TC INPUT is set to the STANDARD mode
(1) Move the cursor to the place which is to be corrected.
CUE TIME
00 H 41 M 07 S 04 F
Cursor
(2) ENTER the new value with the number keys.
CUE TIME
00 H 44 M 07 S 04 F
(3) Press the ENT key.
≥Cue points cannot be cleared.
When TC INPUT is set to the REVERSE mode Partial corrections cannot be made for cue points.
Repeat the input starting from step (1) when TC INPUT on page 33 was set to the REVERSE mode.
– 34 –