3
Reset Menu
Use this menu to execute factory defaults, perform power cycle resets, view the current code version, and activate a different code version. Press the buttons until the Reset menu appears.
RESET | Reset Type | Code Select |
E | No | 0x333 active |
Reset Type Field | Default: No |
Press the 4 button until the cursor is at the Reset Type label, and press ENTER to move into the field. Press the buttons to display the options: No, Factory Defaults, or Power Cycle.
Factory Defaults Option
Use the Factory Defaults option to reset the system to the programming values originally set by the factory firmware.
CAUTION: Selecting this reset option deletes all defined setups and downloaded information. This operation interrupts service output, so use it carefully.
Press ENTER. The following caution message appears and indicates that all programming will be lost if the action proceeds.
CAUTION: IRD memory will be reset
Press E to continue or 
to stop
Press any arrow button (4) to back out of the field and leave it unchanged. Otherwise, press ENTER to proceed. The following message displays.
Factory Default reset in progress..
Power Cycle Option
The Power Cycle option reboots the unit without losing internal user setup information or downloaded network information. Pressing ENTER causes the following caution message to appear.
CAUTION: Reset will interrupt service
Press E to continue or 
to stop
Press any arrow button (4) to back out of the field and leave it unchanged, or press ENTER to proceed. The following message displays:
Power Cycle reset in progress.. .. ..
Press E to continue or 
to stop
44
