Motorola DSR-6400 manual DR Menu Acquisition Recovery

Acquisition Recovery is off.

The unit uses the virtual channel (provided by the uplink) to search for a live channel.

The unit uses the currently-defined transponder definitions from the uplink provider to search for a live frequency.

3

DR Menu (Acquisition Recovery)

Use this menu to review the Acquisition Recovery map. This menu is used most commonly in troubleshooting. Press the  buttons until the DR menu appears.

DR MODE	VCT	VCN	PORT
E DISABLED	(00000)	----	NA

MODE Field Default: DISABLED

This non-editable field displays the DR modes:

DISABLED

CHANNEL

XPNDR

VCT (Virtual Channel Table) Field Default: (00000)

This non-editable field displays the Acquisition Recovery map’s Virtual Channel Table (VCT) number (0 to 65535) that is currently specified by the uplink programmer (BNC). If the VCT is not available, the unit displays (00000).

VCN (Virtual Channel Number) Field Default: ----

If this field is non-editable. The four dashes (----) designate that no virtual channels are currently

being provided from the uplink provider.

If the MODE field displays CHANNEL and the uplink provider is providing one or more valid maps, then this field displays the selection icon (). Use the up and down buttons () to view the list of channels that are currently being supplied by the uplink provider.

PORT Field Default: NA

This non-editable field displays one of the following three messages:

NA	The VCT is either not available or the uplink provider set it to 00000.
NOT DEFINED	The decoder is not available to map a VCT or a configured port.
	This means the channel’s port is not configured.
1,X0(20),H	Input port number (1-8) that is associated with the specified
(example)	channel (followed by a comma), the Satellite name,
	the Satellite ID within brackets, (followed by a comma),
	the polarity specified with either H (for Horizontal)
	or V (for Vertical).

50