Motorola DSR-6400 manual Processor / Back Panel Associations

1

Processor / Back Panel Associations

Figure 1-2shows how Processor numbers (PR) coincide with the Cue Tone ports and Relay ports on the back panel. For example, a DSR-6402 has two processors. The two services use cue tones Q1 (for Processor 1) and Q2 (for Processor 2). To execute Ad insertions, the two processors also use Relay port 1 (for Processor 1) and Relay port 2 port (for Processor 2). Figure 1-2also shows how all PR fields are linked within the menu system.

Model	Available		Relay		Cue Tone
	PR Fields		Ports			Ports
DSR-6401	(none)		1, 2, 3 (See Note.)			Q1
DSR-6402		1, 2		1, 2		Q1, Q2
DSR-6403	1, 2, 3		1, 2, 3		Q1, Q2, Q3
DSR-6404	1, 2, 3, 4		1, 2, 3, [4]		Q1, Q2, Q3, Q4

Q1+ Q1- G Q2+Q2-	PRIMARY AUDIO					RELAY 1	ALARM
	L+	L-	G	R+	R-	NO CM NC G NO CM NC
Q3+ Q3- G Q4+ Q4-	L+	L-	G	R+	R-	NO CM NC G NO CM NC
	SECONDARY AUDIO RELAY 2						RELAY 3

If a fourth relay is necessary on a DSR-6404, see "4th Relay Menu (DSR-6404 only)" on page 42.

CHANNEL PR VCT			CHNL Xpndr
E	2
	1	00000	0000 (MPEG mode)
MPEG SELECT		PR	Program
E		2	00000(Not in map)
		1

STATUS7 SD PR Vido Frmt Resolutn BitRt
E	12	MPEG-2	720x480	6.0M
STATUS8 SD PR Aud Format Mode				BitR
E	12	0 PSTHRU ---		---
STATUS9 HD PR Vido Fmt Resolutn				BitRt
E	2
	1	MPEG-2	1280x720	18.0M
STATUS10 HD PR Aud Format Mode				BitR
E	12	0	PSTHRU ---	---
DIAG	Menus	Clear Cntrs PR
E	Fact 1	No	12

Note: The DSR-6401 has one processor and does not display the PR field on any menu. It also uses three Relay ports (supporting up to three pos- sible ad insertion choices).

The other models have one dedicated relay for each processor (supporting only one ad insertion choice per processor). For more ad insertion choices, use Cue Tones instead.

Changing any one of the PR fields will change all PR fields throughout the entire menu system.

Figure 1-2: Processor / Back Panel Associations

16