Status12 Menu
The mail messages are typically sent from the Uplink Provider and are usually about network issues (e.g., scheduled blackouts and code downloads). These messages can also be reviewed from the Fast Facts 8 OSD screen (described on page 96). Press the buttons until the Status12 menu appears. To view the messages remotely from the units web browser, see "Remote Operation" on page 21.
STATUS12 MAIL: INBOX | > 0/0 |
E |
|
Use the Status12 menu to view the Inbox mail messages along with their delivery timestamp. To move into the field, press 4 and use the buttons to scroll through the mail messages.
STATUS12 MAIL: INBOX | > 2/5 |
E 11/04/2011 21:17:50: A code download
If it is necessary to view an entire message, press ENTER and use the buttons to scroll through the message, two lines at a time.
is scheduled for 11/07/11 at 17:00. This will be the last download until we can
To exit the message and return to the Status12 Menu, press ENTER.
When the following message appears, choose to either move the message to the Archive list (press ENTER) or keep it in the Inbox (press any arrow button [4]). To exit the menu, press and ENTER.
Do you want to mark message as read?
Press E to continue or 
to stop
Pointer and Quantity Fields
The unit displays two values separated by a slash ( / ). The first value is the Pointer field and this is the message number being display on the front panel. The second value is the Quantity field and this is the number of mail messages that are currently in the Inbox. For example, 2/5 indicates that message 2 is currently being displayed and a total of 5 messages are currently in the Inbox.
Note: The unit will maintain up to 300 mail messages between the Status12 menu (Inbox mail messages) and Status13 menu (Archived messages). For example, when the 301st message arrives, the oldest message is then automatically purged. The unit, therefore, maintains the most recent 300 mail messages. Performing a factory reset will delete all messages from the decoder.
73 |
