Motorola DSR-6400 manual Audio1 and Audio2 Menus

3

Audio1 and Audio2 Menus

Use these menus to customize the back-panel analog audio outputs (Phoenix connectors). Press the  buttons until the Audio1 or Audio2 menu appears (shown below).

AUDIO1 AudioMix		DialNorm/Compress
E	Stereo	On-Moderate
AUDIO2 AudioMix		DialNorm/Compress
E	Stereo	On-Moderate

AudioMix Field Default: Stereo

Important: If the audio input mode is stereo and you are connecting to a mono modulator, you must set this field to Mono.

This field allows selection of the audio processing options. Press the 4 button until the cursor is at the AudioMix label, and press ENTER to move into the field. Press the  buttons to display the options:

Stereo	Stereo output on both left and right channels
Dual Mono	Mono output on both left and right channels that can each be assigned to a
	unique language
Mono	Duplicate mono output on both left and right channels
Surround	Enhanced stereo with surround pass-through

Caution: If Dual Mono is selected, a caution screen appears. If Dual Mono is selected and then changed to another option, the caution screen appears again. This caution message denotes possible conflicts between this menu and the language selection menus that could mute the audio. By pressing ENTER (ignoring the caution), the unit changes to Dual Mono, and uses the language previously selected for Mono (or Stereo) for both left and right channels.

CAUTION: Check audio language selection

Press E to continue or to stop

If it is necessary to select a single language for Mono, Dual Mono, or Stereo output, see "AUD1LANG and AUD2LANG Menus" on page 54.

38