Sat Field | Default: |
If the Mode field is set to Manual, use this field to select a satellite name for the designated port. This field is not editable when the Mode field is set to Auto. Press the4 button until the cursor is at the Sat label. Press ENTER to move into the field.
If the unit has locked to a signal (check the
left of the field, use the buttons to reveal the downloaded satellite name(s). Press ENTER to select one and exit the field.
If the unit is not locked to a signal and the provider has instructed specific port programming, use the 4 buttons to select the character position to be changed. Then use the buttons to scroll through the character choices and press ENTER to confirm selection and exit the field.
This field displays dashes
Polar Field | Default: |
If the Mode field is set to Manual, use this field to select a polarity for the designated port. Press the 4 button until the cursor is at the Polar label. Press ENTER to move into the field and press the buttons to display the options: H/LHP
Port Config Menu
Use this menu to configure Low Noise Block (LNB) power for RF In Port 1. This menus is not available when the Input field is set to either ASI In or GigE In.
PORT CONFIG | Port 1 Power |
E | Off |
Port 1 Power Field | Default: OFF |
Use this field to direct power to the external Low Noise Block (LNB). Press the 4 button until the cursor is at the Port 1 Power label, and press ENTER to move into the field. Press the buttons to display the options: OFF and ON. When the ON option is selected, the unit supplies
37 |