Motorola DSR-6400 manual Status8SD Menu, PR Field DSR-6402, DSR-6403,and DSR-6404only, Default

3

Status8(SD) Menu

Press the  buttons until the Status8 SD menu appears. This screen displays the audio encoding configuration for the transcoded SD program.

STATUS8 SD	PR Aud Format Mode		BitR
E	1 0	PSTHRU ---	---

PR Field (DSR-6402, DSR-6403, and DSR-6404 only) Default: 1

The PR (processor) field does not appear on a DSR-6401. Press the4button until the cursor is at the PR label, and press ENTER to move into the field. While ensuring that the cursor remains on the up/down symbol (), press the  buttons to scroll throughout the available processor



values. Press ENTER to confirm the selection and exit the field.

Note: Changing this value will change all other PR fields throughout this unit’s menu system to the same value that is set here.

Aud Field Default: 0

Use the Aud (Audio) field to choose which audio channel to display the status. Press the 4 button until the cursor is at the Audio field, then use the  buttons to choose the first audio channel (0) or the second audio channel (1). Press ENTER to confirm the selection and exit the field.

Format Field

This field is always set to PSTHRU (pass-through) and cannot be changed.

Mode Field

The Mode field indicates the mode (stereo or mono) of the audio for the selected audio channel. Dashes (---) designate no information is available.

BitR Field

The BitR (Bit Rate) field indicates the data rate of the transcoded audio. Dashes (---) designate no information is available.

70