Motorola manual To operate the DSR-6400Series decoder remotely

2

To operate the DSR-6400 Series decoder remotely

1.Open a browser session, type the decoder’s unique IP address in the address bar, and press the ENTER key.

For example, if the decoder is configured with IP address 10.11.23.60, then go to the browser, type: http://10.11.23.60 in the address bar, and press ENTER.

2.When the login dialog box appears (as shown below), enter the User name and Password and select OK.

Note: The uplink programmer who authorizes the unit has the option to set the User Name and Password. If they authorize the unit without using this option, leave both fields blank and simply select OK to gain access to web-based remote operation. (Blank) is the default User Name and Password.

3.When the Home Page appears (as shown below), use the sidebar menu to access the decoder’s various settings and control features.

6401

22.