Dspl Field | Default: All |
Press the 4 button until the cursor is at the Dspl (Display) label, and press ENTER to move into the field. Select the option that applies to the Left and Right. There are three options: All, Avail, and Status. Press the buttons to specify the desired option.
|
| • | All | Use the arrow button (4) to enter the |
|
|
|
| necessary to select languages that are not functional at this time, but will be functional in |
|
|
|
| the future. Press ENTER to confirm the selection and exit the field. |
| Recommended • | Avail | Use the Available option to scroll only through the languages present within the source, | |
| ||||
|
|
|
| while the cursor is in the Left (which matches the Right field). If the active service has |
|
|
|
| only three languages, as listed for the Virtual Channel or program, only three appear. If |
|
|
|
| the user changes the service, the available languages may also change. Press ENTER to |
|
|
|
| confirm the selection and exit the field. |
|
| • | Status | Use the Status option to view the actual audio language. The actual language can |
|
|
|
| differ from the chosen language. This may occur when the user’s choice for language |
|
|
|
| is unavailable. The bullets in the next topic describe the rules that govern which |
|
|
|
| language is used. |
Left and Right Fields
Press the 4 button until the cursor is at the Left label, and press ENTER to move into the field. If the Dspl field is set to All and the AudioMix field (described on page page 38) is set to Dual Mono, then Left and Right will have separately editable fields. Otherwise, they are controlled together as a pair from the Left field alone.
Also use these fields to set the language through the following three options: Any language, if the language is set to All.
The currently available languages, if the Dspl is set to Avail.
def (default), if the Dspl field is set to either All or Avail. Press the buttons to specify the desired option. Press ENTER to confirm the selection and exit the field.
The following bullets describe the rules that govern which language is used:
•If def (default) is selected, the Audio 1 and Audio 2 outputs default to the first and second language, respectively, that is listed for the service.
•If the AudioMix field (described on page 38) is set to Surround, Stereo, or Mono and the user’s choice for language is not available, the audio output is the default language.
•If the AudioMix field (described on page 38) is set to Dual Mono and a language pair is not available that matches the user’s choice for Left and Right languages, the unit selects and outputs the first occurrence of the Left language choice. The system cannot take a Left from one audio pair and a Right from another. If there is no match for the Left language choice, the unit uses the default language.
55 |
