Panasonic NV-MV15 Series, NV-HV50Series (Hi-Fi), NV-SV120 Series Recording, Tape remain counter

Recording

VCR

SP

VCR

SP

SV120 HV60 HV50 MV15

REC	Set the TV set to the video channel and insert a cassette into the video recorder;
	make sure that the cassette's protection tab is still in.
	￿ Select a channel to record from.
	Select the AV channel if you are recording via the 21-pin scart cable.

￿Press REC to start recording.

￿Press the Stop button to stop recording.

￿To pause recording:

The function will switch itself off after approx. 5 minutes to protect the video heads.

￿To resume recording:

￿Recordings in the S-VHS or S-VHS ET REC mode are supported by the PAL TV system only. (Only SV120, page 23)

		SV120 HV60 HV50 MV15
OSD/DISPLAY	Tape remain counter
	The display of the video recorder shows: time - counter - tape remain
	The start of a cassette is indicated as -----.
	￿	Press OSD/DISPLAY until 'RE' is displayed.
		SV120 HV60 HV50 MV15
SP/LP/EP	￿	Prior to starting the recording session, press SP/LP/EP to set the tape speed.
		SP : normal recording time	-	optimal picture quality
		LP : double recording time	-	simple picture quality
		EP : triple recording time	-	reduced picture quality

￿When you play back LP or EP recordings, some cassettes (e.g. E-300 type) may produce interference. This is not indicative of a malfunction.

10