ShowView
ShowView
8 3 5 4 2 - - - -
0 - 9 :enter | ENTER : access |
: correct | EXIT : exit |
Timer recording |
| 1/3 | ||
Pos | Date | Start | Stop | VPS |
PDC | ||||
1 | ARD 31/12 | 10:30 11:30 | SP ON | |
1 | ARD 31/12 | 11:30 12:30 | SP ON | |
2 | ZDF 31/12 | 12:30 13:30 | SP OFF | |
- - - - - - - | - - - - | |||
- - - - - - - | - - - - | |||
- - - - - - - | - - - - | |||
:select | ENTER : access |
| ||
CANCEL :delete | EXIT | : exit |
| |
| SV120 HV60 HV50 MV15 |
ShowView | Press the ShowView button. |
Enter the ShowView number (press to correct any mistakes) |
ENTER
The Timer Recording screen is displayed. |
|
Press TIMER to activate the timer mode. | TIMER |
Ensure that the video recorder symbol | is displayed. |
If the unit fails to automatically detect the station press 
or CH to enter it manually. The video recorder will store the information so that you will not have to enter it again later.
Editing the Timer recording data
ENTER
Select a station 
, 
or press CH
Set the date, week or day of week 
, 
or press DATE
Enter the start time: 
, 
or press ON
Enter the stop time: 
, 
or press OFF
Set the tape speed: A (Automatic), SP, LP, EP 
, 
ENTER | TIMER |
Press TIMER to activate the timer mode. 
ShowView is a trademark of Gemstar Development Corporation.
The ShowView system is manufactured under licence from Gemstar Development Corporation.
14