Panasonic NV-SV120 Series, NV-MV15 Series, NV-HV50Series (Hi-Fi) operating instructions Settings

Page 8

Settings

VCR

Aerial

RF-Coaxial cable

21-pin Scart cable

Connect all the cables as shown in the illustration, then connect the AC Mains lead (part of the package) to an AC wall outlet.

To be able to receive TV programmes it is mandatory to connect the RF-Coaxial cable even if the video recorder is connected by a 21-pin Scart cable.

If you decide to just use the RF-Coaxial cable to connect the TV set you must adjust the video output channel with the TV set's input channel.

Switch on the video recorder

Press the MENU button for approx. 7 seconds. The preset channel appears on the display.

Tune the TV set until the test pattern appears.

	If there is any interference select another channel for the TV set and
	video recorder.
	Press the CH button to change the channel (e.g. to 38).	CH
	Tune the TV set until the test pattern appears.

Press ENTER to confirm.

Image 8

Contents Video Cassette Recorder Operating InstructionsPrecautions ContentsPage Remote control functions Control menuPlayback functions PlaybackTimer Audio3D DNR FrontCVC Super ConnectorsNV-SV120 Settings Auto Setup EnterRecording Tape remain counterVPS/PDC function Timer recordingAutomatic SP/LP selection Timer recording PROG/CHECK EnterQuitting the timer mode Checking the timer programmeChanging or cancelling a timer programme Playing back programmed recordingsTimer recording ShowViewIntelligent Timer Editing a programmeAudio settings General functionsRepeat playback Finding the start of a recordingErasing a cassette OFF Timer Limiting the recording and playback time3D DNR, 3-Dimensional Digital Noise Reduction Menu Overview Manual Setup Setting a new ChannelMenu Changing the name of TV stationsChanging the order of TV stations or deleting a station Shipping condition / restoring factory defaults Creating a new station tableMenu Others AV2AV1 OUT OSDVHS REC VHS ET RECEXT Link DimmedDecoder Connecting a decoderSetting the channel to Decoder External recording control SV120 HV60Amplifier Nicam sound system Ntsc playbackConnect an amplifier Playing back Ntsc video cassettesInserting batteries into the remote control unit Cassette erasure protectionBefore requesting service Remote control unit does Bad picture or soundNot work properly Recording functions do notSpecifications SV120 HV60 HV50 MV15 Power consumptionThese specifications are subject to change without notice Index RFC