Before requesting service
| The use of | |
|
| tape speeds (LP or EP). |
| Check the settings for PAL, MESECAM (page 22), NTSC (page 26). | |
Bad picture or sound: | Verify that the aerial and/or scart cables are attached and work properly. | |
| Check the SQPB setting for | |
| Faulty recordings taken at slow tape speed (EP) in MESECAM are not indicative of a | |
|
| malfunction. |
| Please contact your service technician if the video heads are dirty or worn out. | |
|
| Having a technical service shop clean the video heads is not covered by the guarantee. |
|
|
|
The remote control unit does | Check the distance between the RC unit and the VCR (max. 7 metres). | |
not work properly: | Check the batteries in the remote control unit (page 27). | |
|
|
|
| If flashes on the unit, check if the protection tab of the video cassette is still in. | |
| Check the Clock set menu (page 9). | |
The recording functions do not | Check the start and stop time of the timer programme (page 12). | |
| Check if the TIMER button has been pressed to put the unit into timer mode after | |
work properly: | ||
| programming a recording (page 12). | |
|
| |
| Check the start and stop time of a VPS/PDC recording (page 11). | |
|
|
|
Please contact our aftersales service if you fail to remove problems yourself.
The model number and serial number of this product can be found on the back of the unit. Please note them and keep for future reference.
Model No.
Serial No.
29