Panasonic NV-HS830 Setting the Recording Date/Days, Auto SP/LP Change Function, VPS/PDC Function

Page 15
15

If [ss] Appears under [Pos/Name] after

Entering a SHOWVIEW Number

Pos/Name stands for Programme Position/TV Station Name. Normally, the name of the TV station or the number of the programme position is displayed under [Pos/Name]. However, if the [ss] indication appears, follow the operation steps below.

Press the [CH] (12) repeatedly to select the programme position on which the TV programme to be recorded will be broadcast.

After you have entered the information of a TV station, it remains stored in the VCR’s memory, and you do not need to enter it again in the future.

Setting the Recording Date/Day(s)

Press the [DATE] (11) to select the recording date (1 to 31), daily timer recording date (Su–Sa, Mo–Sa or Mo–Fr) or weekly timer recording date (Su to Sa).

Programming a timer recording (setting the date) is possible up to one month ahead of the TV programme’s broadcasting date and time. Daily and weekly timer recordings will continue until you cancel them.

Auto SP/LP Change Function

If the VCR determines that the remaining tape time is insufficient to record the whole programme, LP mode is automatically selected to ensure that the programme will be recorded as long as possible.

Press the [SP/LP/EP] (21) to select [A].

This function cannot change the recording speed to the EP mode.

If the remaining tape time is still not sufficient even in the LP mode, the programme cannot be recorded to its end.

If the recording speed changes from SP to LP during a timer recording, some brief picture distortion occurs at that point.

VPS/PDC Function

If a TV programme, for example a football game runs longer than scheduled, is shortened or starts earlier or later, this function synchronises the recording start and stop with the actual broadcasting start and stop of the TV programme.

Press the [Cursor] (38) 3421 to make the [ON] indication appear.

[ON] must be displayed under [VPS/PDC] on the TV screen.

The TV station must broadcast VPS/PDC signals.

The programme starting time must be set correctly to the starting time listed in the newspaper/magazine.

To Check, Change or Cancel Timer Recording Programmings

1)Press the [PROG./CHECK] (14) to display the timer recording programmings on the TV screen.

When the VCR is in the timer recording standby mode for a VPS/PDC recording, the On Screen Display may be distorted.

2)Press the [Cursor] (38) 34 to select the programming that you want to change or cancel.

3)Press [OK] (24).

4)To change or cancel timer recording programmings, use the [Cursor] (38) 3421, the [CH] (12), [DATE] (11), [ON] (10), [OFF] (22) or [CANCEL] (13).

5)Press the [OK] (24) to conclude the setting.

6)Press the [EXIT] (27) to exit the On Screen Display.

Notes:

In some cases, for example as listed below, the programming of a timer recording remains stored in the memory until 4 a.m. the next day. However, this is not a malfunction.

When a timer recording was not performed up to the TV programme’s ending time because the remaining tape time was not sufficient.

When you have stopped the timer recording while it was being performed.

To Check the Total Timer Recording Programming Time

The total time indication for timer

4. jjjjj

jj/jj

jj:jj jj:jj jj

jjj

5. jjjjj

jj/jj

jj:jj jj:jj jj

jjj

recording programming lets you

6. jjjjj

jj/jj

jj:jj jj:jj jj

jjj

7. jjjjj

jj/jj

jj:jj jj:jj jj

jjj

8. jjjjj

jj/jj

jj:jj jj:jj jj

jjj

check how many programmes can

 

 

Total (SP)

90min

 

 

 

 

be recorded by comparing with the

 

 

 

 

remaining tape time in the VCR display.

 

 

 

The total time is calculated in the SP mode.

The total time cannot be calculated when setting Daily/ Weekly timer recording.

Image 15
Contents Video Cassette Recorder ContentsConserve the environment For your safetyInserting Remote Control Batteries MaintenanceControls and Components TV Operation Setting the Remote Control to Operate Your TVMenu Operation VCR OperationConnecting and Setting up List of TVs Compatible with the VCR’s Remote ControlIf the TV cannot be operated properly Preset Download To Set Up this VCR with a TV Already in Use Auto Setup Function TV until the Country setting menu Using the VCR Press the OKTurn on the VCR and tune your To Stop Playback Automatically Playback Off Timer Function PlaybackTo Play back a Recorded Part Repeatedly To Pause Recording To Prevent Accidental Erasure of Recorded ContentsRecording To Select the Desired Tape SpeedRecording from an external source CassetteRecording from an external source, for example from a video Satellite or Digital Receiver Cassette Recording Compatible PlaybackEquipment AV Link Function Connecting a DecoderConnecting a Stereo Amplifier Linked Timer Recordings by External Equipments EXT LinkTo Programme with the Showview Function Timer RecordingTo Suspend the Timer Recording Standby Mode To Programme with the On Screen Display OSDAuto SP/LP Change Function Setting the Recording Date/DaysTo Check, Change or Cancel Timer Recording Programmings To Check the Total Timer Recording Programming TimeIntelligent Timer Function Operation B When you want to edit the item of programmeDeleting the recording details Editing Search FunctionsAudio Dubbing For NV-HS880 Series Manual TuningTo Delete, Add or Move a Programme Position Setting the VCR’s Clock Various Settings To Manually Adjust the ClockTo Activate the Automatic Time Correction Function Language or Country Setting Nicam Broadcasting System For NV-HS880EC and NV-HS830EC Other FunctionCrystal View Control Super CVC Super Child Lock Function buttonsBefore Requesting Service Adjusting the Playback PictureConvenient Automatic Functions Remote Control Does Not Work Correctly VCR Does Not Work CorrectlyPlayback Does Not Work Properly 13, 19 IndexVideo Specifications