Panasonic NV-HS830, NV-HS880 operating instructions Language or Country Setting

Page 21

VCR display: For automatic change of the brightness of the VCR display when the VCR is switched off.

Set the brightness of the VCR display as follows:

[ON]:

Indications are brightly lit.

[OFF]:

Indications are not lit.

[DIMMED]:

Indications are dimly lit.

 

 

AV2:

To select the type of external source

 

equipment which is connected to the VCR’s

 

AV2 21-pin socket.

Set the external source equipment as follows:

[DECODER]:

When a decoder is connected.

[EXT LINK 1]:

When a digital receiver which transmits a special

 

control signal recordings via the 21-pin Scart

 

cable, for example the F.U.N. receiver

 

(TU-DSF30/S3) is connected for the linked timer

 

recordings. (See page 13.)

[EXT LINK 2]:

When an external equipment with a timer function

 

is connected for the linked timer recordings.

 

(See page 13.)

[EXT]:

When another VCR or a satellite receiver is

 

connected.

 

 

S-VHS:

To make an S-VHS recording on a S-VHS

 

cassette. (See page 11.)

Set the S-VHS switch as follows:

[ON]:

To record in S-VHS format on S-VHS cassette.

[OFF]:

To record in VHS format on S-VHS cassette.

 

 

S-VHS ET:

To record a VHS cassette with S-VHS

 

Quality. This format is only possible in the

 

SP mode. (See page 11.)

Set the S-VHS ET switch as follows:

Audio playback: To set the Audio mode to be used during playback. (For NV-HS880 Series)

Set Audio mode as follows:

[NORMAL]:

Normally set to this position.

[MIX]:

Use this setting when playing back a cassette

 

tape on which audio dubbing has been

 

performed. The Hi-Fi sound track with the original

 

sound and the normal sound track (mono) with

 

the audio-dubbed sound are played back

 

together.

 

 

Remote:

To set the Remote control mode.

 

(For NV-HS880 Series)

Set the Remote control mode as follows:

[VCR 1]: Select this setting on both the VCR and the remote control for normal use with one VCR.

[VCR 2]: Select this setting on both the VCR and the remote control when using this VCR and another Panasonic VCR in the same place. This ensures that you can operate both VCRs independently with their respective remote control. It also allows you to operate both VCRs with a single remote control, simply by changing the remote control mode on the remote control.

To change the remote control mode on the remote control itself, change the position of the [VCR 1/2] (16) to match the setting. If these settings are not matched, the remote control cannot be used to operate the VCR.

4)Press the [OK] (24) to conclude the setting. (Press it twice on the Remote control setting.)

5)Press the [EXIT] (27) to exit the On Screen Display.

Language or Country Setting

[ON]:

To record in S-VHS ET format on VHS cassette.

[OFF]:

To record in VHS format on VHS cassette.

 

 

Illumination:

To light the front illumination strip when the

 

VCR is on. (For NV-HS880 Series)

Set the lighting of the front illumination strip as follows:

[ON]:

The front illumination strip is lit when the VCR is

 

on.

[OFF]:

The front illumination strip is not lit when the VCR

 

is on.

 

 

TV system:

To select the type of colour TV system to be

 

used during playback or during recording

 

from an external source.

Set the colour TV system as follows:

[AUTO]:

The VCR automatically distinguishes PAL,

 

SECAM/MESECAM system. If the picture lacks

 

colour, set to [PAL] or [MESECAM].

1)Press the [MENU] (7) to display the Main menu on the TV screen.

2)Press the [Cursor] (38) 34 to select [Other settings]. Press the [OK] (24) to display Other settings menu.

3)Press the [Cursor] (38) 3421 to select [Language] or [Country] and the entry field for [Language] or [Country] in this order.

4)Press the [Cursor] (38) 34 to select the desired language or country.

NV-HS880 Series

Other settings

 

Panasonic VCR

2/2

TV system

: AUTO

Picture

: AUTO

Audio playback

: NORMAL

Remote

: VCR 1

Language

:

English

 

Country

:

others

 

 

 

 

 

NV-HS830 Series

 

 

Panasonic VCR

Other settings

 

 

 

Tape length

: AUTO (2 E-240)

OSD

: 4:3

 

Power save

: OFF

VCR display

: DIMMED

AV2

: DECODER

S-VHS

: ON

S-VHS ET

: OFF

TV system

: AUTO

Language

:

English

 

Country

:

others

 

 

 

 

 

[PAL]:

When PAL system is used.

[MESECAM]:

When SECAM system is used.

 

 

Picture:

To set the playback picture sharpness

 

(sharper or softer). (For NV-HS880 Series)

Adjust the picture sharpness as follows:

[AUTO]:

To select sutomatic sharpness adjustment of the

 

playback picture.

[SHARP]:

To make the playback picture sharper.

[SOFT]:

To make the playback picture softer.

 

 

5)Press the [OK] (24) to conclude the setting.

6)Press the [EXIT] (27) to exit the On Screen Display.

21

Image 21
Contents Video Cassette Recorder ContentsInserting Remote Control Batteries For your safetyMaintenance Conserve the environmentControls and Components Menu Operation Setting the Remote Control to Operate Your TVVCR Operation TV OperationConnecting and Setting up List of TVs Compatible with the VCR’s Remote ControlIf the TV cannot be operated properly Preset Download To Set Up this VCR with a TV Already in Use Auto Setup Function TV until the Country setting menu Using the VCR Press the OKTurn on the VCR and tune your To Stop Playback Automatically Playback Off Timer Function PlaybackTo Play back a Recorded Part Repeatedly Recording To Prevent Accidental Erasure of Recorded ContentsTo Select the Desired Tape Speed To Pause RecordingRecording from an external source CassetteRecording from an external source, for example from a video Satellite or Digital Receiver Cassette Recording Compatible PlaybackEquipment Connecting a Stereo Amplifier Connecting a DecoderLinked Timer Recordings by External Equipments EXT Link AV Link FunctionTo Suspend the Timer Recording Standby Mode Timer RecordingTo Programme with the On Screen Display OSD To Programme with the Showview FunctionTo Check, Change or Cancel Timer Recording Programmings Setting the Recording Date/DaysTo Check the Total Timer Recording Programming Time Auto SP/LP Change FunctionIntelligent Timer Function Operation B When you want to edit the item of programmeDeleting the recording details Editing Search FunctionsAudio Dubbing For NV-HS880 Series Manual TuningTo Delete, Add or Move a Programme Position Setting the VCR’s Clock Various Settings To Manually Adjust the ClockTo Activate the Automatic Time Correction Function Language or Country Setting Crystal View Control Super CVC Super Other FunctionChild Lock Function buttons Nicam Broadcasting System For NV-HS880EC and NV-HS830ECBefore Requesting Service Adjusting the Playback PictureConvenient Automatic Functions Remote Control Does Not Work Correctly VCR Does Not Work CorrectlyPlayback Does Not Work Properly 13, 19 IndexVideo Specifications