If you are connecting your VCR to a TV using only RF coaxial cable, then follow the steps. (RF Connection)
RF Coaxial cable must be connected to watch TV channels.
3
1
|
|
| 4 |
| 5 | |
|
|
|
|
| ||
|
|
|
| 6 |
| |
| 2 |
|
|
|
| |
| 7 |
|
|
|
| |
01 | Aerial Input socket | 05 | TV (not supplied) |
| ||
02 | Aerial Output socket | 06 | Aerial Input socket |
| ||
03 | Aerial (not supplied) | 07 | RF Coaxial cable (supplied) | |||
04 | Aerial lead (not supplied) |
|
|
|
| |
1) | Press the | Country | Panasonic VCR | |||
Deutschland | ||||||
| turn on the VCR and tune your |
| Belgien | |||
|
| Belgique | Österreich | |||
| TV until the Country setting menu | België | Portugal | |||
| Danmark | Suomi | ||||
| appears on the TV screen. |
|
| España | Sverige | |
|
|
| Ελλάδα | Schweiz | ||
|
|
|
| France | Suisse | |
2) | Press the [Cursor] (38) 3421. | Italia | Svizzera | |||
Nederland | others | |||||
| Select the country where you are | Norge |
| |||
|
|
| ||||
| using the VCR. |
|
|
|
| |
3)Press the [OK] (24).
The VCR’s Auto Setup automatically starts and tunes all available TV stations and also sets the clock. This takes
about 5 minutes.
•When the indication appears on
the VCR display, the Auto Setup is complete.
If, after setup, the picture on the video playback channel is distorted, change the RF output channel on the VCR to another number.
1)Press the [MENU] (7) for more
than 5 seconds.
The RF output channel number appears on the VCR display. The initial setting is channel 36.
2)Press the [Numeric] (2). Change the RF output channel.
Enter a channel number which differs by 2 or 3 from the one initially set number. For example, as the original number is 36, enter 39.
Retune your TV to the VCR’s new RF output channel.
3)Press the [OK] (24) to conclude the setting.
To cancel the Auto Setup before it has finished Press the [EXIT] (27).
When the clock setting menu appears after Auto Setup has finished
1)Press the [Cursor] (38) 3421 to set the correct time and date.
2)Press the [OK] (24) to conclude the setting.
To confirm that the TV stations have been tuned correctly by the Auto Setup function
See page 18
When no station has been set, confirm all connections of the VCR again and restart the Auto Setup
See page 19.
When the station names and/or channel numbers have not been set correctly
See page 18.
Hint:
•If you select [Schweiz], [Suisse] or [Svizzera] on the Country setting menu, the other setting menu appears automatically to let you set [Power save] to [ON]. In this setting, the VCR’s power consumption is minimised when it is off (Standby mode). To turn the VCR on, keep the
8