Panasonic PV-D4752, PV-D4742 manual Record using Deck buttons

Page 21

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

Record on a Tape

1 Insert a tape with a record tab (p. 6).

• DECK power comes on.

The VCR mode and “VCR” indicator light up on Multi Function Display.

2 Press CH , or NUMBER keys to select the channel.

For “LINE” input, see p. 35.

This video recorder, equipped with HQ (High Quality) system, is compatible with existing VHS equipment. Only use

tapes with the mark. Only tapes tested and inspected for use in 2, 4, 6, and 8 hour machines are recommended.

If channel is over 100, press 100 key then press the remaining 2 digits.

Press SPEED

 

3 to select the record speed (p. 6).

SP = Standard Play

LP = Long Play

SLP = Super Long Play

 

Speed appears on-screen and on Multi Function Display.

4 Press REC

to start recording.

(The VCR REC indicator lights up on Multi Function Display),

To edit out unwanted scenes, press PAUSE/STILL to pause, and again to resume recording.

You cannot view another channel during recording.

Note

Remove loose or peeling labels from tapes to prevent tape jam.

Operation

Basic

 

 

5 Press STOP

to stop recording.

One Touch Recording (recording in progress),

Press REC repeatedly to set the recording length

(30 min. ~ 4 hours).

• DECK shuts off after the preset record length.

Normal Rec 0:30 1:00

4:00 3:00 2:00 1:30

Record one station, watch another,

press VCR/TV

(“VCR” goes out on Multi Function Display), select channels at TV (recording continues).

Select Channels at DECK (In STOP or

REC. PAUSE mode),

press VCR/TV

(“VCR” lights up on Multi Function Display),

select channels at DECK.

Play a disc while recording a tape.

insert a disc during recording,

press DVD, and then press PLAY.

Notes

It is not possible to record from DVD/ Video CD/ CD to VHS tape using DECK.

Watching one channel and recording another is not possible when using Cable Box or DSS Receiver.

After 5 minutes in Pause mode, DECK stops to protect a tape and video heads.

Record using DECK buttons

1Insert a tape.

 

 

4 Press REC

 

 

 

 

 

 

 

 

 

 

to start

 

 

 

 

 

 

 

 

VCR/TV

 

 

Recording.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Select

 

Multi Function Display

Channel.

 

 

 

 

Press STOP/EJECT to stop.

 

 

<Model PV-D4752 DECK shown.>

21

Image 21
Contents PV-D4752 only Guía para rápida consulta en español está incluidaImportant Safeguards and Precautions Region Management Information Inside of productFCC Caution Accessories Before UsingDisc Handling Loading the BatteriesTable of Contents Deck & Cassette Information Definition of Terms DVD SpecificationsLocation of Controls Remote ControlNumber keys Bold Italic VCR and DVD FunctionsSTOP/EJECT Front View of DeckFast FORWARD/SEARCH Play REWIND/SEARCH Channel / TRACKING/V-LOCK VCR/TV RECTo enjoy Progressive Scan video PV-D4752 only Rear View of DeckDisplays On Screen & Multi Function On Screen Displays VCRMulti Function Display Basic Connections ConnectionsDSS Receiver Deck TV Deck TV Cable Box Deck TV OUTOther Connections You Can Connections For DVD OnlyWith a Cable Box Deck Cable Box TV Connect With Two Cable BoxesAudio Connections Ready ChecklistDeck Amplifier Speaker DVDFirmly connect the cable to the connector To Optical Digital Audio Input ConnectorDoing Initial Setup Ready to Play Before doing Initial SetupPlugging the AC Power Plug into an AC outlet Turn TV onAction Select SET Manual Clock SetIf Auto Clock Set was incomplete Press ACTION* on remote to display Clock screenReset Language, Channels, Clock Press ActionTo display Menu VCR’s Output Channel Power VCRAdd or Delete a Channel DST Daylight Saving TimePlayback using Deck buttons Ready ChecklistEJECTDVDPlayback/ Record on a Tape REW/SLOWRecord using Deck buttons Basic DVD Operation Operation using Deck buttonsPress OPEN/CLOSE Press or Number keys see below to select title,Auto-Power Off Function Surround Sound SystemResume Function Timer Recording PowerADD/DLT Prog Select VCR Operation Receivable Broadcast Types DisplayAudio Audio Mode for Playback Audio Mode for RecordingMulti-Brand Control Feature Multi-Brand Control SetupUsing Multi-Brand Control Magnavox Hitachi/ HughesIndex Search Program End Search Tape OperationCommercial Skip Auto Operation FunctionsAuto Play Auto RewindDisplay Stop Action Select SET CM/ZERO Counter Reset Repeat PlayZero Search Weak Signal Display Feature VCR Lock FeatureAuto Shut-Off Feature To turn on, hold down REC onTape Position and Tape Status Feature Special VCR FeaturesInput Stop PAUSE/ Still Action Select SET Tape Position REC Press Tape PositionPlaying Source VCR Recording Editing Deck Copying Your Tapes DubbingSubtitle Language DVD only Disc OperationAudio Soundtrack Language DVD only Press SUB TitlePicture Zoom DVD only Multiple Angle Viewing DVD onlyPress Angle To select the desiredDVD Menu DVD only Title Menu DVD onlyPress Title Press SET or PlayProgram Repeat Play Video CD/CD Program Play Video CD/CDRandom Play Video CD/CD Setting the Sound Output LevelPress to select Music CDPress DVD OperationTo return to normal ScreenDisc information screen for DVD Detailed Descriptions of each On-Screen DisplayDisc information screen for Video CD/ CD Deck information screen for DeckMP3 Playback Play Mode NormalSingle Repeat Folder RepeatDVD Lock DVD only Press Number keys to enter your secret codePress Action twice Disc Languages DVD only Settings for DVD OperationLpcm DVD selections Audio OutputDolby Digital selections Dts selectionsStill Mode TV ModeExample Language Code List Code Language9072 Chinese 8373 Singhalese 9085 Zulu Before a Timer Recording is about to Begin If you attempt to set or review a TimerIf you press REC on the remote control or If you press Stop or PowerPower Correction Before Requesting ServiceRemote Control Correction Recording & Playback CorrectionBe sure disc is installed with label side up DVD/ Video CD/ CD CorrectionMiscellaneous Correction Servicenter List PANASONIC/QUASAR Video Products Limited WarrantyRealizando configuracion inicial Conexiones/Configuracion Inicial Ready to PlayConectando Para Ant/Cable-DECK-TVGrabación normal 030 Programación fácil para la grabación con temporizadorOperaciones básicas del DVD Presione repetidamente Clear o Display Para volver a la pantalla normalFijaciones iniciales Cambio del idioma de la pista de sonido DVD solamenteSelección de Idiomas DEL Disco DVD solamente Cambio del idioma de subtítulos DVD solamenteUtilización de un menú de títulos DVD solamente Visión desde otro ángulo DVD solamenteSelección de vocal para los discos de Karaoke DVD/Video CD Utilización de un menú de DVD DVD solamenteDeck & VCR Index