Deck & Cassette Information

Panasonic PV-D4742, PV-D4752 manual Deck & Cassette Information

Head Cleaning

Playing older or damaged tapes may eventually cause video heads to become clogged.

Video Head Clog Sensor

During playback, this
screen appears if	V I DEO HEADS MAY
clogging is detected.	NEED CLEAN I NG
To remove screen,	PLEASE I NSERT HEAD
To remove screen,	CLEAN I NG CASSETTE
press PLAY on the	OR REFER TO MANUAL
press PLAY on the
remote or DECK.	END : PLAY

•Use “dry” type head cleaning cassette only. (Part No. NV-TCL30PT is recommended.)

•Follow cleaning tape instructions carefully. Excessive use of tape can shorten head life.

•If head clog symptoms persist, contact your nearest Factory Servicenter or authorized Servicenter (see p. 52).

Prevent Accidental Tape Erasure

Break off the tab to prevent recording.

Record Tab

Screw driver

To record again

Cover the hole

with cellophane tape.

Built-in Head Cleaner

A clean video head helps produce a clear picture.

So, we have equipped your DECK with

abuilt-in, non-chemical head cleaning system that helps prevent clogging of the video heads. Cleaning is performed each time you load or unload a video cassette.

•This feature is preventative only, If your video heads are seriously clogged, consider the use of a chemical non-abrasive head cleaning kit or take your DECK to a Servicenter.

Record/ Playback Time

Only use tapes with the mark in this DECK.

Tape Speed	Type of Video Cassette

Setting	T60	T120	T160
SP	1 Hour	2 Hours	2 Hours
(Standard Play)			40 Minutes

LP	2 Hours	4 Hours	5 Hours
(Long Play)			20 Minutes

SLP	3 Hours	6 Hours	8 Hours
(SuperLongPlay)

Cleaning DECK

Use a soft cloth or dusting attachment of a vacuum cleaner to remove dust from the ventilation holes on the back sides and bottom of the cabinet. Plastic surfaces are easily scratched and can be marred by alcohol and various solvents. Avoid excessive use of oil-based furniture polishes since the materials used in the cabinet will accumulate more dust. We recommend using a non-abrasive, antistatic cleaner and polisher.

Features for a Quality Picture (VCR)

Digital Auto Picture

Automatically controls the video output signal for less noise depending on the tape condition.

Digital Auto Tracking

Continuously analyzes the signal and adjusts for optimum picture quality.

Manual Tracking Control (to reduce picture noise)

Use during Playback and Slow Motion mode to reduce picture noise.

Press CH (TRACKING) / on the remote control or on DECK until the picture clears up. To return to Auto Tracking, press POWER off, then on again a few seconds later.

R R

V-Lock Control (to reduce picture jitter)

In Still mode, CH (TRACKING) / operate as a V-Lock control.

6	For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com