Initial Setup for Basic Connections (Ready to Play)
Before doing Initial Setup
1 Turn TV on.
2 See connections a RF Coaxial Cable Connection and b AV Cable Connection on p. 12.
<RF Coaxial Cable Connection> Set TV to channel 3.
<AV Cable Connection> Set TV to VIDEO.
3 [DECK ➛ TV]
• Go to “Doing Initial Setup (Ready to Play).” (See below.)
[Cable Box ➛ DECK ➛ TV], [DSS ➛ DECK ➛ TV]
•Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel in your time zone.
•If you use a DSS Receiver, it must be turned off.
Doing Initial Setup (Ready to Play)
1
2
Press VCR on remote for VCR mode.
Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel and clock set starts.
•If screen below does not appear, check DECK - TV connection and, if TV is tuned to channel 3, try switching it to channel 4.
•To change VCR’s output channel, please refer to “VCR’s Output Channel” on p. 19.
Plugging the AC Power Plug into an AC outlet
CH AUTO SET PROCEEDING
CANCEL : STOP
AUTO CLOCK SET
PROCEEDING
CANCEL : STOP
16 | For assistance, please call : |
| |
|