Tape Operation
Search System
For each recording, an invisible index mark is placed on the tape. A program index and information are also included for timer recordings. These marks are used to access or scan recordings.
Index Search
Program End Search
1 | INDEX SEARCH |
ENTER INDEX NUMBER :1
USING 1- 9 KEYS
FORWARD SEARCH :FF
REVERSE SEARCH :REW
NEXT :SEARCH
EXIT :STOP
Press SEARCH*
to display SEARCH in Stop or Play mode, and then
press NUMBER keys
to select recording number.
•To calculate number, see below.
Press FF/SLOW+ or REW/SLOW- on the remote to start search.
Locates end point of recording for continuity.
Press SEARCH twice | |
1 to display SEARCH in Stop or Play | |
mode. |
|
|
|
2 PROGRAM END SEARCH | Press FF/SLOW+ |
on the remote to | |
| start PROGRAM |
SEARCH START : FF | END SEARCH. |
EXIT :SEARCH | • To cancel, press |
| PLAY or STOP. |
Examples of Program End Search.
2 | INDEX SEARCH | Play begins at |
| search end. |
To search forward or back 1 index,
Fig. 1
Program 1 | INDEX | Program 2 or BLANK |
the current tape position |
Press SEARCH button |
FORWARD SEARCH : FF
REVERSE SEARCH : REW
press FF/SLOW+ or REW/SLOW- on the remote while screen left is displayed (10 sec.).
•To cancel, press PLAY or STOP.
End Point |
FF
Fig. 2 |
|
|
|
|
|
INDEX | Program 1 | BLANK | INDEX | Program 2 | BLANK |
the current tape position Press SEARCH button
| End Point |
FF |
To Calculate Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 | 2 | 3 | 4 |
| 5 | 6 | 7 |
|
|
|
|
|
|
|
|
Fig. 3 |
| |
| the current tape position | |
| Press SEARCH button | |
INDEX | Program 1 | BLANK |
FF
End Point
Program 2
If search exceeds a few seconds in BLANK area.
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
1 | 2 | 3 | 4 | 5 | 6 | 7 |
NOTE: 
indicates start points of each recording.
Upon locating end point,
➛search continues 7 sec. past end point,
➛tape rewinds to 10 sec. before end point,
➛tape plays to end point and stops.
Note
•If Index Search is started very close to an index mark, that index mark may not be counted in the search.
Note
•If Program End Search is started very close to an index mark, that mark may be skipped over.
30 | For assistance, please call : |
| |
|