Panasonic NV-VP30EBL manual Others Menu, Remote, Tape length

Tape length

: AUTO( E-240)

AV2

: DECODER

SQPB

: AUTO

OSD

: 4:3

VCR/DVD OUTPUT

: AUTO

Remote

: VCR 1

EXT LINK

: 2

: select

MENU : return EXIT

: exit

VCR

DVD

Tape length

Sets the tape length of the cassette you use.

AUTO (

E - 240), E - 195, E - 260, E - 300

Selects the type of external unit connected to the VCR's AV2 21-pin

scart socket.

AV2

DECODER: If a decoder is connected.

NORMAL : If another video recorder or satellite receiver is connected.

AUTO

: The VCR automatically detects the type of recording.

SQPB

ON

: Plays back S-VHS format cassettes in quasi S-VHS format.

OFF

: Plays back cassettes recorded in VHS format only.

4:3

: Displays appear at the edge of the screen

(displays not visible on 16:9 format screens).

OSD

WIDE

: Displays appear at the edge of the screen

(displays appear in the middle on 4:3 format screens).

OFF

: No on-screen displays

AUTO

: When you press a function button the unit will activate the

VCR/DVD

relevant video or DVD output, depending on the setting of

the VCR/TV/DVD switch.

OUTPUT

MANUAL : Press the VCR/DVD OUTPUT button to manually toggle

between the video and DVD outputs.

You can set both the unit and the remote control unit to another

Remote

frequency by choosing VCR1 or VCR2 from the menu.

Press and hold remote control unit buttons ENTER and 1 or 2

to set the

frequency channel of the relevant unit.

1

: The VCR recording start and stop time is controlled by a

control signal sent via the 21-pin cable from the external

EXT LINK

unit, for example Sky Digibox.

2

: The VCR will start recording when AV2 input detects the

video signal and stop recording when the video signal is

switched off by the external unit.