CAUTION
How to replace the fuse
Confirm the AC mains plug fitted and follow the instructions below. Illustrations may differ from actual AC mains plug.
1.Open the fuse cover with a screwdriver.
Fuse cover
1
2.Replace the fuse and attach the fuse cover.
Caution for AC Mains Lead
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience.
A 
or the BSI mark 
on the body of the fuse. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY
If a new plug is to be fitted please observe the wiring code as stated below. If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code: Blue:
Neutral, Brown: Live.
As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red.
2
Fuse
(5 ampere)
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL 
OR COLOURED GREEN OR GREEN/YELLOW. THIS PLUG IS NOT WATERPROOF - KEEP DRY.
FOR YOUR SAFETY DO NOT REMOVE OUTER COVER. To prevent electric shock, do not remove the cover. There are no user serviceable parts inside. Refer all servicing to qualified service personnel. For your safety, be sure not to connect or handle the equipment with wet hands.
6