VCR AUTO SETUP
VCR Display
Auto Setup
Tuning | : Ch 21 |
|
|
Owner ID
PIN number : 846*
Name | : | ************** |
House No | : | *********** |
Postcode | : | *********** |
You now have the opportunity
to enter your details and help the police crack crime see instruction book.
:select ENTER : store
EXIT : exit
TV
VCR DVD Set the VCR/TV/DVD switch to VCR.
Turn on the TV.
then press the
The VCR will now start Auto Setup.
-While Auto Setup is running the first digit of the VCR display will flash. After a while it will stop flashing and the RF output channel number will be displayed.
-Select an unused channel
-If you connect your VCR/DVD to the TV by a Scart cable, you do not need to tune the TV as described above. Simply select appropriate input mode on TV.
Owner ID
You can complete the Owner ID now or skip this step and do it later.
To do it later, press the EXIT button again. Your VCR is now ready to use.
To set the Owner ID now, press the Numeric buttons or to enter a
Press to correct the digit.
Make sure that you will remember the PIN number (make a note of it).
Press the ENTER button twice to confirm.
Enter the [Name], [House No] and [Postcode] in the same way.
Press the ENTER button to confirm each entry.
Press the EXIT button to leave the Owner ID screen.
You will now see the TV picture. Your VCR is now ready to use.
16